ADC To Vector

R2026b

Convert concatenated 16-bit ADC input samples to vector outputs

• 

ADC To Vector block

To add a block to a model, double-click the canvas and start typing the block name. Then, select the block from the list.

Libraries:
SoC Blockset for AMD / RFSoC / ZCU111
SoC Blockset for AMD / RFSoC / ZCU208
SoC Blockset for AMD / RFSoC / ZCU216
SoC Blockset for AMD / RFSoC / ZCU670

Description

The ADC To Vector block converts the concatenated 16-bit analog-to-digital converter (ADC) input samples to vector outputs.

The block accepts 16-bit samples packed into N x 16 bits through the adcData input port and outputs a vector of N samples through the vectorData output port. N is the number of samples per clock cycle.

Ports

Input

adcData — ADC data samples

scalar

ADC data samples, specified as a scalar. The size of this input must be N x 16 bits, where N is the number of samples per clock cycle set by the Samples per clock parameter.

Data Types: int16 | int32 | int64 | uint16 | uint32 | uint64 | fixed point

Output

vectorData — ADC data samples in vector form

vector

ADC data samples, returned as a vector. The block returns the data as an N-element column vector, where N is the number of samples per clock cycle set by the Samples per clock parameter.

For example, consider the case where N = 2 and the input to the adcData port is of size 32 bits. In this case, the block returns vector [S₀, S₁], where S₀ is a 16-bit value sliced from 0 to 15 bits of input data from the adcData port, and S₁ is a 16-bit value sliced from 16 to 31 bits of input data from the adcData port.

Data Types: int16 | uint16

Parameters

Samples per clock — Number of samples per clock cycle

4 (default) | integer from 1 to 16

Specify the number of samples per clock cycle as an integer from 1 to 16. This parameter sets the required bit width of the input samples and sets the output vector size.

Output data type — Output data type

fixdt(1,16,0) (default) | int16 | uint16

Specify the output data type as a signed or unsigned fixed point or an integer data type. For more information on how to specify output data type, see Specify Data Types Using Data Type Assistant (Simulink).

Programmatic Use: Add Block

To add the block programmatically, use the add_block function with one of these library block paths as the source.

"rfsoczcu111lib/ADC To Vector"

"rfsoczcu208lib/ADC To Vector"

"rfsoczcu216lib/ADC To Vector"

"rfsoczcu670lib/ADC To Vector"

Example: add_block("rfsoczcu111lib/ADC To Vector","myModel/myBlock",MakeNameUnique="on")

Extended Capabilities

HDL Code Generation

Generate VHDL, Verilog and SystemVerilog code for FPGA and ASIC designs using HDL Coder™.

To automatically generate HDL code for your design and execute on an SoC device, use the SoC Builder tool.

Version History

Introduced in R2020b