Connectors and References
Grounds, neutral ports, phase splitters, multiplexers
Use connector blocks for grounding and to terminate, separate, and combine signals.
Simscape Blocks
| Cable and Connectors | Cable and connectors with optional fault modeling (Since R2024b) | 
| Busbar | Load flow analysis busbar connector | 
| Busbar (DC) | Load flow analysis DC busbar connector (Since R2022a) | 
| Delta Reference (Three-Phase) | Internal reference point for delta-connected network | 
| Electrical Reference | Connection to electrical ground | 
| Floating Neutral (Three-Phase) | Internal floating neutral point for wye-connected network | 
| Floating Reference | Reference for measuring voltage of other nodes in floating electrical network (Since R2023b) | 
| Grounded Neutral (Three-Phase) | Connect phases of three-phase system to electrical reference | 
| Neutral Port (Three-Phase) | Connect phases of three-phase system to electrical conserving port | 
| Open Circuit | Electrical port terminator that draws no current | 
| Open Circuit (Three-Phase) | Three-phase terminator that draws no current | 
| Phase Permute | Permute phases of three-phase system | 
| Phase Splitter | Expand or combine three electrical conserving ports | 
| PS Three-Element Demux | Convert three-element physical signal vector into scalar physical signals | 
Topics
- Essential Electrical Modeling TechniquesApply Simscape™ modeling rules when you build electronic, mechatronic, and electrical power system networks using Simscape Electrical™. 
- Three-Phase PortsConnect three-phase blocks using composite ports for three-phase lines or expanded ports for single-phase lines. 







