Receive UDP message from UDP host
Simulink Support Package for Parrot Minidrones
The UDP Receive block receives UDP message from a UDP host.
The block output, Data, emits UDP packet data as a one-dimensional vector of a specified data type. The block output, Size, emits the size of the data in the UDP buffer. With each sample, the block outputs the bytes of a UDP message as a data vector of the size specified by the Data size (N) parameter.
The data type of the block output,
Data, depends on the
Data type parameter. The data type of the block output,
represents the total bytes. For example, if the
Data Type is double
and the number of elements (mentioned using the
Data size (N)
parameter) is 5, then the value of
Size is 40, that is, 8*5
The block receives the message on the port number specified in the Local IP port parameter. Match the port number specified in the Local IP port parameter with the remote port number of the sending host.
Parrot® minidrone is a little-endian device. The UDP Receive block expects the byte order of the received UDP data to be little-endian.
If you are having trouble using UDP to communicate with a computer, the antivirus or firewall software might be blocking UDP traffic. If so, configure the software to allow the traffic for a specific IP port number.
Data — Output UDP message received from sending UDP host
At each sample time, the port outputs the data bytes of a message received as a data vector of the size specified by the Data size (N) parameter.
Size — Number of data bytes in UDP message received
At each sample time, the port outputs the number of data bytes in the received message.
Local IP port — IP port on the receiving UDP host
25000 (default) |
Specify the port number of the application on which you want to receive messages. Match the local port number with the remote port number of the sending host.
Do not use ports
for UDP communication with Parrot minidrone as these ports are
Data type — Data type of the data bytes in UDP message
uint8 (default) |
Select the data type of the bytes to be received from the sending host.
Data size (N) — Number of data bytes in each UDP message
Specify the number of data bytes that you want to receive in each message.
Sample time — Interval to read messages from sending UDP host
0.005 (default) | any non-negative value that is a multiple of 0.005 (5 ms) | -1
Enter the time interval at which to receive data.
When you set this parameter to
-1, Simulink® determines the best sample time for the block based on the
block context within the model.
Introduced in R2018a