Workaround to Reset Interrupt Pin of Sensors Supporting Latched Interrupts

This topic helps you with the workaround to reset the interrupt pin of sensors which support latched interrupts. Sensor supporting latched interrupts provide register to reset the interrupt pin. The interrupt pin has to be reset after the system initialization. This ensures occurrence of continuous interrupts from the sensor. Use a model as shown in the image below to clear the interrupt pin of sensors that support latched interrupts.

The following table shows the peripheral address, reset interrupt pin register address, and data size for different sensors.

Sensor	peripheral address	Reset interrupt pin register address	Data size (uint8)
ADXL345	0x53 (default) | 0x1D	0x32	6
LIS3DH	0x18 (default) | 0x19	0xA8	6