Configure Virtual Vehicle Scenario and Test
Before completing this step, see Configure Virtual Vehicle Data.
Next, use the Scenario and Test tab to configure your virtual vehicle test plan. The available options depend on the virtual vehicle Powertrain architecture and Model template parameter settings.
If you set Scenario to
Cycle, you can use:
Drive cycles from predefined sources. By default, the block includes the
FTP–75drive cycle. To install additional drive cycles from the support package, see Support Package for Maneuver and Drive Cycle Data. The support package has drive cycles that include the gear shift schedules, for example,
Workspace variables that define your own drive cycles.
xlsx, or .
Wide open throttle (WOT) parameters, including initial and nominal reference speeds, deceleration start time, and final reference speed.
To choose one or more existing drive cycles, click the Scenario and Test tab and follow these steps:
Under Scenario, select
Under Drive cycle, select the desired drive cycle.
Click Add to Test Plan.
If you have selected
Combined longitudinal and lateral vehicle
dynamics (not applicable in this example), you can also choose from
several vehicle dynamics tests under the Scenario tab:
Sine with Dwell
For this example, use the default
FTP75 drive cycle.
After completing this step, see Configure Virtual Vehicle Data Logging.