Generate VHT-SIG-A waveform
Generate VHT-SIG-A Waveform
Generate the VHT-SIG-A waveform for an 80 MHz transmission packet.
Create a VHT configuration object, assign an 80 MHz channel bandwidth, and generate the waveform.
cfgVHT = wlanVHTConfig; cfgVHT.ChannelBandwidth = 'CBW80'; y = wlanVHTSIGA(cfgVHT); size(y)
ans = 1×2 640 1
The 80 MHz waveform has two OFDM symbols and is a total of 640 samples long. Each symbol contains 320 samples.
Extract VHT-SIG-A Bandwidth Information
Generate the VHT-SIG-A waveform for a 40 MHz transmission packet.
Create a VHT configuration object, and assign a 40 MHz channel bandwidth.
cfgVHT = wlanVHTConfig; cfgVHT.ChannelBandwidth = 'CBW40';
Generate the VHT-SIG-A waveform and information bits.
[y,bits] = wlanVHTSIGA(cfgVHT);
Extract the bandwidth from the returned bits and analyze. The bandwidth information is contained in the first two bits.
bwBits = bits(1:2); bi2de(bwBits)
ans = 2x1 int8 column vector 1 0
As defined in IEEE Std 802.11ac-2013, Table 22-12, a value of
'1' corresponds to 40 MHz bandwidth.
cfg — Transmission parameters
Transmission parameters, specified as a
osf — Oversampling factor
1 (default) | scalar greater than or equal to 1
Oversampling factor, specified as a scalar greater than or equal to 1. The oversampled cyclic prefix length must be an integer number of samples.
y — VHT-SIG-A time-domain waveform
VHT-SIG-A time-domain waveform, returned as an NS-by-NT matrix. NS is the number of time-domain samples, and NT is the number of transmit antennas.
NS is proportional to the channel bandwidth. The time-domain waveform consists of two symbols.
See VHT-SIG-A Processing for waveform generation details.
Complex Number Support: Yes
bits — Signaling bits used for the VHT-SIG-A field
48-bit column vector
Signaling bits used for the VHT-SIG-A, returned as a 48-bit column vector.
The very high throughput signal A (VHT-SIG-A) field contains information required to interpret VHT format packets. Similar to the non-HT signal (L-SIG) field for the non-HT OFDM format, this field stores the actual rate value, channel coding, guard interval, MIMO scheme, and other configuration details for the VHT format packet. Unlike the HT-SIG field, this field does not store the packet length information. Packet length information is derived from L-SIG and is captured in the VHT-SIG-B field for the VHT format.
For a detailed description of the VHT-SIG-A field, see section 18.104.22.168.3 of IEEE® Std 802.11™-2016. The VHT-SIG-A field consists of two symbols: VHT-SIG-A1 and VHT-SIG-A2. These symbols are located between the L-SIG and the VHT-STF portion of the VHT format PPDU.
The VHT-SIG-A field includes these components. The bit field structures for VHT-SIG-A1 and VHT-SIG-A2 vary for single user or multiuser transmissions.
BW — A two-bit field that indicates 0 for 20 MHz, 1 for 40 MHz, 2 for 80 MHz, or 3 for 160 MHz.
STBC — A bit that indicates the presence of space-time block coding.
Group ID — A six-bit field that indicates the group and user position assigned to a STA.
NSTS — A three-bit field for a single user or 4 three-bit fields for a multiuser scenario, that indicates the number of space-time streams per user.
Partial AID — An identifier that combines the association ID and the BSSID.
TXOP_PS_NOT_ALLOWED — An indicator bit that shows if client devices are allowed to enter dose state. This bit is set to false when the VHT-SIG-A structure is populated, indicating that the client device is allowed to enter dose state.
Short GI — A bit that indicates use of the 400 ns guard interval.
Short GI NSYM Disambiguation — A bit that indicates if an extra symbol is required when the short GI is used.
SU/MU Coding — A bit field that indicates if convolutional or LDPC coding is used for a single user or for user MU in a multiuser scenario.
LDPC Extra OFDM Symbol — A bit that indicates if an extra OFDM symbol is required to transmit the data field.
MCS — A four-bit field.
For a single user scenario, it indicates the modulation and coding scheme used.
For a multiuser scenario, it indicates use of convolutional or LDPC coding and the MCS setting is conveyed in the VHT-SIG-B field.
Beamformed — An indicator bit set to 1 when a beamforming matrix is applied to the transmission.
CRC — An eight-bit field used to detect errors in the VHT-SIG-A transmission.
Tail — A six-bit field used to terminate the convolutional code.
An oversampled signal is a signal sampled at a frequency that is higher than the Nyquist rate. WLAN signals maximize occupied bandwidth by using small guardbands, which can pose problems for anti-imaging and anti-aliasing filters. Oversampling increases guardband width relative to the total signal bandwidth, thereby increasing the number of samples in the signal.
This function performs oversampling by using a larger IFFT and zero pad when generating an OFDM waveform. This diagram shows the oversampling process for an OFDM waveform with NFFT subcarriers comprising Ng guardband subcarriers on either side of Nst occupied bandwidth subcarriers.
 IEEE Std 802.11ac™-2013 IEEE Standard for Information technology — Telecommunications and information exchange between systems — Local and metropolitan area networks — Specific requirements — Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications — Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz.
C/C++ Code Generation
Generate C and C++ code using MATLAB® Coder™.
Introduced in R2015b
1 IEEE Std 802.11ac-2013 Adapted and reprinted with permission from IEEE. Copyright IEEE 2013. All rights reserved.