Need help on determine receiver SNR
1 visualización (últimos 30 días)
Mostrar comentarios más antiguos
Dear community.
I'd like to design the DBPSK tranceiver that adapt from this example Top-Down Design of an RF Receiver - MATLAB & Simulink (mathworks.com)
Here is my design specifications.
Data rate = 600 bps
Each packet 200 bits long
DBPSK modulation
Recerver Sensitivity = -126 dBm
Packet Error rate (PER) 10e-6
Now I am on the step that determine the receiver SNR requirement.
My problem is when trying to do Error Rate Calculation, BER is always 0.5 (50%) of the transmitt packet.
Could you guys help to have a look why I always BER like this?
Here is what parameter I set for each block. (Only changed parameters is mentioned)
Bernoulil Binary Generator
- Sample time = 1/600
- sample per frame = 200
Raised Cosine Transmit Filter
- Rolloff factor = 0.05
- Filter span in symbols = 10
- Output sample per symbol = 2
- Input processing = frame based
Raised Cosine Receive Filter
- Rolloff factor = 0.05
- Filter span in symbols = 10
- Input sample per symbol = 2
- Decimation factor = 2
- Input processing = frame based
Dealy
- Delay length = 10 (Txfilterspan/2+Rxfilterspan/2)
Error Rate calculation
- Receive Delay = 10
I also attached the Simulink work space for your reference.
Best Regrads,
Fumihiko Sato
0 comentarios
Respuestas (1)
Gokul Nath S J
el 18 de Abr. de 2023
Editada: Gokul Nath S J
el 18 de Abr. de 2023
Hi Fumihiko Sato,
Based on your query, it seems that the bit error is fixed at 0.5. Even if the other quantities are changed, still the bit error is constantly converging to 0.5.
As per my observation, I found that the error rate is converging to the probability of one/zeros that you input. Ideally it should not. If you change the probability of zero to a different value and then run the code, the Bit error will try to converge to that point. So the delay should be properly taken care since the block error rate calculation is carried out with random 1s and 0s as the convergence makes it clear.
with regards,
Gokul Nath S J
0 comentarios
Ver también
Categorías
Más información sobre Simulink Coder en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!