PV module simulation

66 visualizaciones (últimos 30 días)
Nuno
Nuno el 8 de Mzo. de 2011
Respondida: SINDHUJA D el 13 de Oct. de 2019
Which toolbox i will be used in PV module simulation?
  2 comentarios
Andrew Alkiviades
Andrew Alkiviades el 23 de En. de 2012
Hi Nuno,
Are you using the single diode equivalent circuit?
Do you have the series and shunt resistances for the module you are looking at?
Muhammad Talha
Muhammad Talha el 7 de Oct. de 2019
Hello guys i need help regarding my final year project i mathematically model a PV cell where output is Current and voltage so i can get easily output waveform accurately but i dont know how can i convert this module to PV array model like in simulink Built in block where we get + or - sign and how i can i attached boost converter with my model

Iniciar sesión para comentar.

Respuesta aceptada

Arnaud Miege
Arnaud Miege el 8 de Mzo. de 2011
It depends on what you want to. If you want to model the photovoltaic cell, then you'll probably need Simscape and SimElectronics, which has a Solar Cell block. If you are interested in modelling the connection to the grid and the DC/AC conversion, then you'll probably need SimPowerSystems. have a look at the webinar Model-Based Design for Solar Power Systems for more information.
HTH,
Arnaud
  4 comentarios
Hossein
Hossein el 27 de Dic. de 2011
Hi Arnaud,
as I found we can connect simscape and simpower together ,So there is another way to simulation,which is mix both of them...
for example using Solar Cell block from simscape and connect to DC/DC converter from simpower ...
Is it right????
Mohan
Mohan el 1 de Mzo. de 2015
I need some help in grid connection of inverter. i have attached a model, in which the current from inverter + grid = load. they r not in phase bt are getting added up...,,, if there s a mistake n PLL pls help me crct it

Iniciar sesión para comentar.

Más respuestas (8)

Ambika
Ambika el 27 de En. de 2012
hi,am also working on MPPT.. for the PV module u can go for either coding or modelling using blocks...if u r intrested in modelling using blocks then u can easily do it with the help of commonly used blocks,sinks,sources,math operations in simulink otherwise u can go for simpower system ,there u can directly take diode,sources,MOSFET etc..
  1 comentario
Hossein
Hossein el 30 de En. de 2012
hi Ambika,
Do you have any experience about connecting simpower and simscape?
I mean connecting the solar cell block in simscape to DC-DC converter in simpower ???

Iniciar sesión para comentar.


Hossein
Hossein el 27 de Ag. de 2011
How can I find "Model-Based Design for Solar Power Systems" Webinar???????????????
  3 comentarios
Sai001 Cheguri
Sai001 Cheguri el 10 de Oct. de 2011
How can I find out the values in temperature tab of the solar cell,(temperature exponents of saturation current(Is),series and parallel resistances(Rs & Rp) and what is the first order temperature coefficient?
shrik kader
shrik kader el 28 de Mayo de 2017
What are these two links? when I click on them it turn me back to this comment.

Iniciar sesión para comentar.


Hossein
Hossein el 31 de Oct. de 2011
Thank you very much Lucas,I have looked to this webinar so much,you help me with webinar so much...

herve manara
herve manara el 9 de Nov. de 2011
Hi Folks,
I am working on project that is to develop a small-scale solar system (solar harvester) to charge rechargerable batteries of a Wireless Sensor Devices/Nodes). I need to design and simulate a system that work with MPPT but I have no idea on how to implement MPPT to drive the gate pin of MOSFET as seen on the video link above.
I look up to your propositon.

Hossein
Hossein el 16 de Nov. de 2011
Hi Menara, The main duty and output of MPPT is generate duty cycle for DC/DC converter or DC/AC inverter ,so you can refer the duty cycle to MOSFET to adjust the voltage of Photovoltaic panel to find the knee(maximum power point) of I-V curve,becuse in this point you have the maximum area under I-V curve and conclude the maximum power...

Alfred Baams
Alfred Baams el 30 de Mzo. de 2017
what is appropriate device or components to be use to stabilises the pv array model before connection to dc boost converter?
  1 comentario
Tony Castillo
Tony Castillo el 13 de Feb. de 2018
I think you can gain stabilization in that point with a simple Capacitor. Did you do it?

Iniciar sesión para comentar.


SHOUTRIK DAS
SHOUTRIK DAS el 9 de Mzo. de 2019
Hi, I"m designing a MPPT system for a PV module.
I have designed the PV module and used the current output from the pv module subsystem as the control signal for a controlled current source.
Before connecting the controlled current source the output from the PV module is a smooth curve.
After connecting the Current source it looks like this.
How to solve this issue??
Capture02.JPG

SINDHUJA D
SINDHUJA D el 13 de Oct. de 2019
Hi,
I am designing a Incremental Conductance MPPT based solar panel both series and parallel connection. I faced a problem while connecting a solar 4 strings are in parallel connection. In parallel Connection current value not added .
Is there any solution.

Categorías

Más información sobre Solar Power en Help Center y File Exchange.

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by