library link and library element modification in simulink (dspace and simulink involved)
4 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
When accessing Task Configuration under RTI simulation options in my simulations configuration parameters in Simulink, I get the following problem:
from RTI, model initialization failed.
RTI task configuration failed with message:
パラメーター 'Gain' ('zmp_ac_ver1/ControllerLogic/Controller/PID/Kd[A.s//rad]' 内) の評価中のエラー
パラメーター 'Gain' ('zmp_ac_ver1/Plant/Motor/PID_current/Kd_curr' 内) の評価中のエラー
パラメーター 'Gain' is parameter 'Gain' and 内) の評価中のエラー is something like inner value (evaluation?) error.
What I understood is that it might be caused by whats written in the warning i get when I open the simulation mdl file:
Warning: zmp_ac_ver1.mdl, 3809 行目: "zmp_ac_ver1/Plant/Motor/PID_current/Discrete Derivative"
は、パラメーター付きのリンクです。このリンクへの変更内容の表示、破棄、伝播を行うには、[ライブラリ リンク] のメニュー項目を使用してください
In general\private\openmdl at 13
In open at 159
In uiopen at 196
I found it is the English "Warning: Overriding parameters of '.../Discrete Derivative"' which is inside a library link. These changes can be changed, propagated, or viewed using the 'Link Options' menu item." so i checked for those changes
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/165751/image.png)
How do I allow them? Do I understand correctly that Gain cannot be obtained without these changes?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/165753/image.png)
0 comentarios
Respuestas (0)
Ver también
Categorías
Más información sobre Multicore Processor Targets en Help Center y File Exchange.
Productos
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!