Using fft() to calculate PSD.
5 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I used the code below perform spectral analysis of signal with known period of 4 s:
load lujan.dat
data_out.time = lujan(:,1);
data_out.disp = lujan(:,2);
Y = fft(data_out.disp,1000);
Y(1)=[];
NY = length(Y);
Pyy = abs(Y(1:floor(NY/2))).^2;
nyquist = 1/2;
f = (1:NY/2)/(NY/2)*nyquist;
plot(f,Pyy,'-b','LineWidth',3);
title('Power spectral density');
xlabel('Frequency (Hz)');
However the output graph shows a peak at 0.05 Hz which is not correct! IS there something obvious i'm doing wrong?
thanks
0 comentarios
Respuesta aceptada
Wayne King
el 21 de Jun. de 2012
Are you sure the sampling frequency is 1 ? If so, how far off is the peak from where you expect it to be? Is it almost correct or way off? You also don't tell us how long the time series is, so we don't know why you are adding the length input argument to fft() . Your frequency increment of 1/NY (0.0025) is correct.
Más respuestas (1)
Wayne King
el 21 de Jun. de 2012
Then your sampling frequency is specified incorrectly.
Fs = 1/0.2;
% here I'll create a signal just to show you
t = 0:1/Fs:12-1/Fs;
x = cos(2*pi*0.25*t)+randn(size(t));
Y = fft(x,256);
Pyy = abs(Y(1:floor(256/2)+1)).^2;
freq = 0:Fs/256:5/2;
plot(freq,10*log10(Pyy))
grid on
set(gca,'xtick',[0 0.25 0.5 1 1.5 2 2.5])
0 comentarios
Ver también
Categorías
Más información sobre Fourier Analysis and Filtering en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!