fprintf no values in DAT file
Mostrar comentarios más antiguos
This code is not generating values in the temperatureparallel.dat file. I believe it has to do with %10.6f. It is graphing properly. Any help is greatly appreciated.
clc
close all
fid=fopen('.\temperatureparallel.dat','w');
fprintf(fid,'variables = "t","tfire","ts1","ts2","ti","ta"\r\n');
fprintf(fid,'zone\r\n');
g=9.81;
h=1.0; % m height of wall
%set properties
%carbon steel 1
cps1=502.48;
ks1=16.27;
rhos1=8030.0;
As1=0.0025; %Area of steel exposed to tf
%carbon steel 2
cps2=502.48;
ks2=16.27;
rhos2=8030.0;
%insulation
cpi=711.756; %(J/kg-K)
ki=0.033;
rhoi=32.04;
Ai=0.9975; %Area of insulation exposed to tf
%cpi=473.0d0
%ki=43.0d0
%rhoi=7801.0d0
%air
cpa=1006.43;
ka=2.42E-2;
rhoa=1.2041;
rmua=1.7894E-5;
rnua=rmua/rhoa;
alpha=ka/(rhoa*cpa);
pra=rnua/alpha;
Va=1.0; %m^3
%set widths of each section
li=104.0/1000.0; %m
ls1=108.0/1000.0; %m
ls2=4.0/1000.0; %m
la=1.0; %m
%evaluate average of insulation and steel conductivity using harmonic average
kbar=ki*ks1/(ki+ks1);
%set initial conditions
t=0.0;
to=293.15;
tf=0.0;
ts1=to;
ts2=to;
ti=to;
ta=to;
%set time parameters and initial conditions
tfinal=3600.0;
nt=100.0;
dt=tfinal/nt;
outputs(1,1:6)=[t,tf,ts1,ts2,ti,ta];
beta=1.0d0/(ta+273.15);
%write initial conditions
fprintf(fid,'%10.6f %10.6f %10.6f %10.6f %10.6f %10.6f\r\n',t,tf,ts1,ts2,ti,ta);
%update each variable ts1,ts2,ti,ta to the new time step
for j=2:nt+1
ha=hac(h,rhoa,g,ta,ts2,rmua,ka,cpa);
tf=tfire(t,to);
k1s1=dt*rhss1(t,ts1,ta,tf,ks1,rhos1,cps1,li,ls2,ha);
k1s2=dt*rhss2(t,ts2,ti,ta,kbar,rhos2,cps2,ls2,li,ha);
k1i=dt*rhsi(t,ts2,ti,tf,ki,kbar,rhoi,cpi,ls2,li);
k1a= dt*rhsa(t,ts1,ts2,ta,rhoa,cpa,Va,As1,Ai,ha);
ha=hac(h,rhoa,g,ta+0.5*k1a,ts2+0.5*k1s2,rmua,ka,cpa);
tf=tfire(t+0.5*dt,to);
k2s1=dt*rhss1(t+0.5*dt,ts1+0.5*k1s1,ta+0.5*k1a,tf,ks1,rhos1,cps1,li,ls2,ha);
k2s2=dt*rhss2(t+0.5*dt,ts2+0.5*k1s2,ti+0.5*k1i,ta+0.5*k1a,kbar,rhos2,cps2,ls2,li,ha);
k2i=dt*rhsi(t+0.5*dt,ts2+0.5*k1s2,ti+0.5*k1i,tf,ki,kbar,rhoi,cpi,ls2,li);
k2a=dt*rhsa(t+0.5*dt,ts1+0.5*k1s1,ts2+0.5*k1s2,ta+0.5*k1a,rhoa,cpa,Va,As1,Ai,ha);
k3s1=dt*rhss1(t+0.5*dt,ts1+0.5*k2s1,ta+0.5*k2a,tf,ks1,rhos1,cps1,li,ls2,ha);
k3s2=dt*rhss2(t+0.5*dt,ts2+0.5*k2s2,ti+0.5*k2i,ta+0.5*k2a,kbar,rhos2,cps2,ls2,li,ha);
k3i=dt*rhsi(t+0.5*dt,ts2+0.5*k2s2,ti+0.5*k2i,tf,ki,kbar,rhoi,cpi,ls2,li);
k3a=dt*rhsa(t+0.5*dt,ts1+0.5*k2s1,ts2+0.5*k2s2,ta+0.5*k2a,rhoa,cpa,Va,As1,Ai,ha);
ha=hac(h,rhoa,g,ta+k3a,ts2+k3s2,rmua,ka,cpa);
tf=tfire(t+dt,to);
k4s1=dt*rhss1(t+dt,ts1+k3s1,ta+k3a,tf,ks1,rhos1,cps1,li,ls2,ha);
k4s2=dt*rhss2(t+dt,ts2+k3s2,ti+k3i,ta+k3a,kbar,rhos2,cps2,ls2,li,ha);
k4i=dt*rhsi(t+dt,ts2+k3s2,ti+k3i,tf,ki,kbar,rhoi,cpi,ls2,li);
k4a=dt*rhsa(t+dt,ts1+k3s1,ts2+k3s2,ta+k3a,rhoa,cpa,Va,As1,Ai,ha);
ts1=ts1+1.0/6.0*k1s1+1.0d0/3.0d0*k2s1+1.0/3.0*k3s1+1.0/6.0*k4s1;
ts2=ts2+1.0/6.0*k2s2+1.0d0/3.0d0*k2s2+1.0/3.0*k3s2+1.0/6.0*k4s2;
ti=ti+1.0/6.0*k1i+1.0d0/3.0d0*k2i+1.0/3.0*k3i+1.0/6.0*k4i;
ta=ta+1.0/6.0*k1a+1.0d0/3.0d0*k2a+1.0/3.0*k3a+1.0/6.0*k4a;
t=t+dt;
fprintf(fid,'%10.6f %10.6f %10.6f %10.6 %10.6f %10.6f\r\n',t,tf,ts1,ts2,ti,ta);
outputs(j,:)=[t,tf,ts1,ts2,ti,ta];
end
figure(1),clf(1);
t=outputs(:,1);
plot(t,outputs(:,2:end));
%subfunctions start here.
function f1=hac(h,rhoa,g,ta,ts2,rmua,ka,cpa)
beta=1.0d0/(ta+273.15);
deltat=ts2-ta;
pr=rmua*cpa/ka;
gr=h^3*rhoa^2*g*deltat*beta/rmua^2;
ra=gr*pr;
nu=(0.825+0.387*ra^(1.0/6.0)/(1.0+(0.492/pr)^(9.0/16.0))...
^(8.0/27.0))^2;
f1=nu*ka/h;
end
function f2=tfire(t,to)
f2=345.0*log10(((8.00*t)/60)+1.0)+to;
end
function f3=rhsa(t,ts1,ts2,ta,rhoa,cpa,Va,As1,Ai,ha)
f3=((ha*As1)/(rhoa*cpa*Va))*(ts1-ta)+((ha*Ai)/(rhoa*cpa*Va))*(ts2-ta);
end
function f4=rhsi(t,ts2,ti,tf,ki,kbar,rhoi,cpi,ls2,li)
f4=(2*ki)/(rhoi*cpi*li^2)*(tf-ti)-kbar/(rhoi*cpi*li)*(ti-ts2)/(0.50*(ls2+li));
end
function f5=rhss1(t,ts1,ta,tf,ks1,rhos1,cps1,li,ls2,ha)
f5=(2*ks1)/(rhos1*cps1*(li+ls2)^2)*(tf-ts1)-ha/(rhos1*cps1*(li+ls2))*(ts1-ta);
end
function f6=rhss2(t,ts2,ti,ta,kbar,rhos2,cps2,ls2,li,ha)
f6=kbar/(rhos2*cps2*ls2)*(ti-ts2)/(0.50*(ls2+li))-ha/(rhos2*cps2*ls2)*(ts2-ta);
end
2 comentarios
Stephen23
el 30 de En. de 2019
@Carl Hendrickson: for such a large amount of code it is preferable to upload it by simply clicking the paperclip button.
Respuestas (1)
I guess, that the file is written correctly, but not in the location you expect:
fid=fopen('.\temperatureparallel.dat','w');
This create the file in the current directory, but maybe this is not the folder you are looking to. Use absolute file names in general:
File = fullile(tmepdir, 'temperatureparallel.dat');
[fid, msg] = fopen(Fiel, 'w');
if fid == -1
error('Cannot open file: %s, %s', File, msg);
end
1 comentario
Carl Hendrickson
el 30 de En. de 2019
Categorías
Más información sobre Application Deployment en Centro de ayuda y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!