poctave() returns incorrect fractional-octave-band results
3 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
I have encountered a bug when using the fractional-octave-band output of the poctave() function with 'psd' data. Under some circumstances, some of the bands contain significantly incorrect power levels, and sometimes two bands appear when there should only be one band present.
I have created a small M-file to demonstrate the problem, bug_poctave_psd.m, and it is attached. The output from this script is copied below. The error is easily understood when the sum of the powers in the fractional-octave-bands does not equal the total power in the input signal! the test program can easily be modified to produce errors where the results returned by poctave() are 100% out, which is clearly significant.
The error seems to occur because poctave() does not correctly handle partial FFT bin widths when performing the integration of the PSD data that falls within a fractional-octave-band. It does not correctly apportion the energy contained in a single FFT bin based on the fraction of the FFT bin that needs to be considered when a bandedge lies somewhere within the bandwidth of the requisite FFT bin. This error will be occurring for all the fractional-octave-bands, but it only becomes visible with certain test signals.
For example, here is an FFT bin, whose limits are denoted by |, with a bandedge (between two contiguous fractional-octave-bands) occurring within its confines, denoted by +.
|=====+==========|
In the line diagram above, going from left to right, it is seen that the PSD bin's contribution of energy to the left-hand fractional-octave band is less than its contribution to the right-hand fractional-octave-band. This needs to be taken into account at all upper and lower bandedges for each fractional-octave-band.
However, poctave() appears to take all the energy in the PSD bin and assign it to BOTH the upper and lower fractional-octave-bands. This is clearly incorrect, but, owing to typical FFT resolutions, the error is difficult to identify in most types of output. My simple test signal, which is a valid time-domain signal, produces significant errors in the output of poctave().
+===========================================================+
| TEST CASE 1: No cosine signal at Nyquist frequency (Fs/2) |
+===========================================================+
Number of waves = 8
Frequencies X = 125.000 250.000 500.000 1000.000 2000.000 4000.000 8000.000 16000.000
Amplitudes X = 1.414 1.414 1.414 1.414 1.414 1.414 1.414 1.414
Total Power X = 8.000
Total Power Pxx PSD = 8.000
Delta F in FFT = 1.000 Hz
Octave Fraction b = 1.000
Total Power poctave = 8.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Octave Fraction b = 1.500
Total Power poctave = 9.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 2.000
Total Power poctave = 10.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 3.000
Total Power poctave = 8.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Octave Fraction b = 6.000
Total Power poctave = 10.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 12.000
Total Power poctave = 10.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 24.000
Total Power poctave = 10.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 48.000
Total Power poctave = 11.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
Octave Fraction b = 96.000
Total Power poctave = 14.000
Total Power Pxx PSD = 8.000
Total Power X Data = 8.000
Incorrect power computed using results from poctave().
+=================================================================+
| TEST CASE 2: Includes cosine signal at Nyquist frequency (Fs/2) |
+=================================================================+
Number of waves = 9
Frequencies X = 125.000 250.000 500.000 1000.000 2000.000 4000.000 8000.000 16000.000 32768.000
Amplitudes X = 1.414 1.414 1.414 1.414 1.414 1.414 1.414 1.414 1.414
Total Power X = 10.000
Total Power Pxx PSD = 10.000
Delta F in FFT = 1.000 Hz
Octave Fraction b = 1.000
Total Power poctave = 8.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Incorrect power computed using results from poctave().
Octave Fraction b = 1.500
Total Power poctave = 9.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Incorrect power computed using results from poctave().
Octave Fraction b = 2.000
Total Power poctave = 10.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Octave Fraction b = 3.000
Total Power poctave = 8.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Incorrect power computed using results from poctave().
Octave Fraction b = 6.000
Total Power poctave = 10.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Octave Fraction b = 12.000
Total Power poctave = 10.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Octave Fraction b = 24.000
Total Power poctave = 10.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Octave Fraction b = 48.000
Total Power poctave = 11.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Incorrect power computed using results from poctave().
Octave Fraction b = 96.000
Total Power poctave = 14.000
Total Power Pxx PSD = 10.000
Total Power X Data = 10.000
Incorrect power computed using results from poctave().
>>
5 comentarios
Mathieu NOE
el 17 de Dic. de 2020
hello
maybe you should send your test case to the TMW for double check
all the best
Respuestas (1)
Pratyush Roy
el 4 de Feb. de 2021
Hi Witold,
I have heard that this issue is known and the concerned parties may be investigating further.
Regards,
Pratyush.
0 comentarios
Ver también
Categorías
Más información sobre Spectral Measurements en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!