im trying to do multiple trigger events in simulink stateflow. what i need is to create 2 clk (clk1 and clk2) with different frequency witch controls light as you can see on stateflow chart. but when i simulate my model it triggers when both clk are at the rising edge and holds light "ON", instead of switching light "OFF" on rising clk1 and "ON" on rising clk2
From my understanding, you are facing an issue in switching between states inside the chart, at the rising edges of the respective clock signals. You can achieve the same using 'Edge Detector' blocks. This block will generate a value one, when it detects a change in value in its input. The detection criteria can be made 'rising', 'falling' or 'either' . You can input 'clk1' and 'clk2' to two different edge detector blocks and the output from the blocks can be used to switch between the states 'on' and 'off' in the stateflow chart.
No se puede completar la acción debido a los cambios realizados en la página. Vuelva a cargar la página para ver el estado actualizado.
Translated by
Seleccione un país/idioma
Seleccione un país/idioma para obtener contenido traducido, si está disponible, y ver eventos y ofertas de productos y servicios locales. Según su ubicación geográfica, recomendamos que seleccione: .
También puede seleccionar uno de estos países/idiomas:
Cómo obtener el mejor rendimiento
Seleccione China (en idioma chino o inglés) para obtener el mejor rendimiento. Los sitios web de otros países no están optimizados para ser accedidos desde su ubicación geográfica.