Stacking fault maps

versión 1.1 (153 KB) por Fernando León-Cázares
Maps of the stress orientation dependence for the appearance of different stacking fault configurations in Ni-based superalloys

9 descargas

Actualizada 15 Jan 2022

De GitHub

Ver licencia en GitHub

Stacking-fault-maps

Maps of the stress orientation dependence for the appearance of different stacking fault (SF) and superlattice stacking fault (SSF) configurations in Ni-based superalloys strengthened by cuboidal precipitates. The precipitate bypassing mechanisms are calculated from 1D force balances. The fault configurations include:

  • Infinitely long ISF
  • Semi-Infinite ISF
  • Extended SISF + ISF
  • Isolated SISF
  • Extended SESF + ESF
  • Extended SESF + ISF
  • Isolated SESF

The derivation and further details of this work have been published in: F.D. León-Cázares, F. Monni, C.M.F. Rae. Acta Materialia, 199 (2020) 209-224. Please cite this publication if you benefit from this repository.

View Stacking fault maps on File Exchange

Requirements

Coded in Matlab R2021a. Plotting of the inverse pole figure (IPF) map requires the mtex toolbox (tested with version 5.1.0).

License

This repository is published under a GNU GPL v3 license (License: GPL v3). See LICENSE.txt for full licensing information.

Contents

  • SF_maps.m - Script to run all the functions and plot the maps.
  • sf_channel.m - Calculation of the precipitate bypassing forces.
  • stacking_faults_region.m - Calculation of the SF configurations that can develop for a given material and stress states.
  • m24.m - Calculation of the Schmid and Escaig stresses. Additional details of this function can be found in this repository.

How to use

Everything can be run from the SF_maps.m file. Input the required material parameters, uncomment the sections for the plots needed and select their individual input parameters. The sections are:

  • Regions of stacking fault configurations - This section maps the SF and SSF that can develop within a range of Schmid and Escaig stresses determined by the user.

  • Uniaxial loading inverse pole figure (IPF) - This section determines the SF and SSF configurations that can develop for all possible uniaxial loading directions, either for tension or compression. Make sure to add to path the mtex folder and initialise it with the command 'startup_mtex'. Decrease the parameter for the angular resolution and adjust the marker size to obtain more defined maps. The results are plotted in an IPF or on the IPF mapped onto the full stress map.

Citar como

León-Cázares, F. D., et al. “Stress Orientation Dependence for the Propagation of Stacking Faults and Superlattice Stacking Faults in Nickel-Based Superalloys.” Acta Materialia, vol. 199, Elsevier BV, Oct. 2020, pp. 209–24, doi:10.1016/j.actamat.2020.08.032.

Ver más estilos
Compatibilidad con la versión de MATLAB
Se creó con R2021a
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!
Para consultar o informar de algún problema sobre este complemento de GitHub, visite el repositorio de GitHub.
Para consultar o informar de algún problema sobre este complemento de GitHub, visite el repositorio de GitHub.