Open loop and Closed loop Model of Boost Converter
Versión 1.0.0 (41,1 KB) por
karthik kumar k
Design and implementation of Open loop and closed loop model of Boost converter using MATLAB
Design of Boost Converter:
- Step 1: Given: Vin=12V; Vout=18V; Fs= 25kHz; Pout=20W
- Step 2: To find the value of resistor R=?
= 16.2 Ohms
- Step 3: To find the Duty Ratio, D=?
D= 1 – (Vin/Vout) = 0.3333=33.33%
- Step 4: To Find the value of inductor, L=?
= 48 microH
For operating in a continuous conduction mode, the value of L should be more than the designed value by 25%. Therefore, 60 microH is chosen.
- Step 5: To Find the value of capacitor, C=?
= 16.45 microF
Note, , Which decides the rippling content at the output side.
Citar como
karthik kumar k (2024). Open loop and Closed loop Model of Boost Converter (https://www.mathworks.com/matlabcentral/fileexchange/124595-open-loop-and-closed-loop-model-of-boost-converter), MATLAB Central File Exchange. Recuperado .
Design and implementation of Open loop and closed loop model of Boost converter using MATLAB - By, K. Karthik Kumar
Compatibilidad con la versión de MATLAB
Se creó con
R2016a
Compatible con cualquier versión desde R2016a hasta R2022b
Compatibilidad con las plataformas
Windows macOS LinuxEtiquetas
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Descubra Live Editor
Cree scripts con código, salida y texto formateado en un documento ejecutable.
Versión | Publicado | Notas de la versión | |
---|---|---|---|
1.0.0 |