Access GPIO pins on BeagleBoard from Simulink
This submission contains two Simulink models showing how to access GPIO pins on the BeagleBoard. I developed the models using R2012a BeagleBoard Support Package. I used MATLAB Function Block to implement GPIO Read and GPIO Write functionality. The MATLAB Function Blocks are basically used to make GPIO related Linux system calls.
One can do a great deal using the same paradigm to call into Linux shell. This example showcases "system" and "popen" calls.
While the examples were developed in R2012a, they should work in R2012b as well.
NOTE: GPIO pins on the BeagleBoard use 1.8 V logic levels. Do not connect devices using +5V or +3.3V logic levels to the GPIO pins or you risk frying your board.
Citar como
Michael Lundgren (2024). Access GPIO pins on BeagleBoard from Simulink (https://www.mathworks.com/matlabcentral/fileexchange/38508-access-gpio-pins-on-beagleboard-from-simulink), MATLAB Central File Exchange. Recuperado .
Compatibilidad con la versión de MATLAB
Compatibilidad con las plataformas
Windows macOS LinuxCategorías
Etiquetas
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!Descubra Live Editor
Cree scripts con código, salida y texto formateado en un documento ejecutable.
Versión | Publicado | Notas de la versión | |
---|---|---|---|
1.0.0.0 |