I2C block for ArduinoIO simulink package

Versión (142 KB) por Zhuo Li
This is an augmenting block that enables the ArduinoIO package with the I2C bus read capability.
12,3K descargas
Actualizado 30 ene 2014

Ver licencia

A new method i2cRead() is added to the arduino.m file. The adiosrv.ped file is modified accordingly. So, with this add-on, your Arduino Uno can speak in I2C through Simulink. The I2C read functionality can be accessed either from Matlab command window or Simulink.
1) In command window, a sample syntax is
a.i2cRead(hex2dec('5A'), hex2dec('07'))
where '5A' denotes the 7bit device address in hex format 0x5A, and '07' denotes the register address '0x07'.
2) In Simulink, you can find the Arduino I2C read block in the arduino_io_lib. When you put the Arduino I2C Read block into your block diagram, be sure to put the correct device address and register address to the parameter field. Help doc is available for instruction inside this download.

Citar como

Zhuo Li (2024). I2C block for ArduinoIO simulink package (https://www.mathworks.com/matlabcentral/fileexchange/41602-i2c-block-for-arduinoio-simulink-package), MATLAB Central File Exchange. Recuperado .

Compatibilidad con la versión de MATLAB
Se creó con R2012b
Compatible con cualquier versión
Compatibilidad con las plataformas
Windows macOS Linux
Más información sobre Simulink Supported Hardware en Help Center y MATLAB Answers.

Inspirado por: Legacy MATLAB and Simulink Support for Arduino

Inspiración para: Interface an LSM303DLHC

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!





Versión Publicado Notas de la versión

Changed the serial waiting time longer from 0.0001 to 0.0014 so as to avoid the serial read timeout.

Added a parameter field for register address to make this block more general.