Imports/plots and exports seismic data file in the IRIS/SAC format.

Matlab codes to read and write SAC seismic data file

GAOT-ECM: Extension For Control And Modeling - Seismic Vibration Case Study with MR Damper

industrial plant identification and PID controller design.This file contains the Seismic Vibration Case Study. For other examples, please consult the GAOT-ECM: Extension For Control And Modeling main file.This

The seismic analysis in ANSYS may be implemented with ANSeismic

acceleration–time history data are used for seismic analysis. Such time histories may be derived synthetically, by either numerical simulation of the source and wave propagation mechanisms, or by considering proper

Dynamic response of a building subject to a seismic input

The script analizes the dynamic response of a linear system subject to a seismic input through the Response History Analysis (RHA) and the Response Spectrum Analysis (RSA).After the calculations

Calculates P, S, SV and SH radiation pattern using shear-tensile seismic source model.

and azimuth.[1] Kwiatek, G. and Y. Ben-Zion (2013). Assessment of P and S wave energy radiated from very small shear-tensile seismic events in a deep South African mine. J. Geophys. Res. 118, 3630-3641

This is the study of a SDOF subjected to a seismic input

The fastest wiggle variable area seismic data plotting function after comparison.

Matlab tools for geophysical (mainly exploration seismic) interpretation and processing

These are the files used in the webinar on Feb. 23, 2011.

You can watch the archived version of this webinar at http://www.mathworks.com/videos/large-data-in-matlab-a-seismic-data-processing-case-study-81792.html (recommended). The demos show how to manage

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/blob/master/Forward%20modeling/seismic_wedge_model.mCite: Anugerah, Nisfu; Ginting, Gamaliel Rhema; Wicaksono, Gigih Aji; Salsabila, Alda; Subakti, Puguh Ari; Syahputra, Loris Alif (2018): Membuat Model Sintetik untuk Model Pembajian. figshare

This script aims to offer the Shock Response Spectrum of an earthquake's acceleration time history

Irvine in 2006 as one of the eligible calculation methods.- For further information, please relate to the document "SeismicResponseSpectrumGUI.pdf" included in the .zip file.

Finite-Difference Time-Domain (FDTD) simulation for Seismic Metamaterials (Crystals) Design for Earthquake Shield Applications

Finite-Difference Time-Domain (FDTD) simulation for 2D Seismic Metamaterials (Crystals) Design for Seismic Wave Isolation Researchs.For more details for Seismic Crystal(Metamaterials

Given the Seismic input in t vs. a form, plots the displacement response spectra

In the context of seismic analysis of structures, various earthquake inputs may be required depending upon the nature of analysis being carried out. The response spectrum of an earthquake is the most

Calculates seismic parameters from an acceleration time series

This function calculates seismic parameters from an acceleration time series. Specifically, it calculates velocity vs time, displacement vs time, peak ground acceleration (PGA), peak ground velocity

Release 15.09.21 of a collection of functions for analysis/display of seismic and well-log data.

A set of about 170 functions (plus support functions called by them) for analysis and display of exploration-seismic data and well logs. These functions read and write seismic data in standard SEG-Y

Release 10.0301 of a collection of functions for analysis/display of seismic and well-log data.

A set of about 170 functions (plus support functions called by them) for analysis and display of exploration-seismic data and well logs. These functions read and write seismic data in standard SEG-Y

Computes P-phase arrival time in windowed digital single-component seismic recording using AIC

Script to calculate the seismic dispersion curve commonly used in MASW with curve picking options

WIGGLE displays a matrix as lines plus filled lobes, useful for oscillatory and/or seismic data.

provide a visual analysis of seismic and seismological data, or any other vibration data, in order to help the identification of events that can be stressed out with the coherent alignment of lobes

Release 6.1925 of a collection of functions for analysis/display of seismic and well-log data.

A set of 140 functions (plus support functions called by them) for analysis and display of exploration-seismic data and well logs. These functions read and write seismic data in standard SEG-Y format

Simulates a seismic survey over a rectangular grid of area x by y meters

Seismic surveying requires placing a large number of sensors (geophones) in a large grid pattern, triggering a seismic event, and recording accelerometer readings at each sensor. These readings are

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_visualisasi.mCite: Virginia, Intang Pinki; Arahman, Nanditha; Laurens, Kinta Rahma Aulika; Pertiwi, Tiaraningtias Bagus; Suryani, Adelia (2018): Visualisasi Data Seismik 2 Dimensi. figshare

select the seismic phase from your interesting point

This code will help filter the depth, magnitude, and distance range of seismic waves that you desire. You can filter the phases you want from this code, and it will tell you how many events will

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_bandpass_filter.mCite: Hidayat, Lutfi Nur; Syafrudin, Taufan Rifqi; Suwesti, Angreani; Khakim, Umar Abdul; Astuti, Mega Dwi; Hanafi, Mochammad Ibnu (2018): Bandpass Filter pada Data Seismik. figshare

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_data_spektrum.mCite: Aisy, Safira Rihhadatul; Elsalama, Nadiah Faridah Firdausi; Anugrah, Sari Atika; Nabila, Afviya; Nugraha, Rama Desta (2018): Spektrum Data Seismik sebagai Fungsi Kedalaman. figshare

Save your time when making scientific figures with MATLAB

axesEasyPlot.setCLim({ax1, ax2}, 'largest');% set the colormap and colorbar% use the same colormap for both axes and set the white color for zeroEasyPlot.colormap({ax1, ax2}, EasyPlot.ColorMap.Diverging.seismic, 'zeroCenter

This function generates elastic response spectrum for seismic design of buildings and bridges.

Response Spectrum Analysis for MDOF System

The purpose of this study is to develop a seismic analysis of MDOF Structure based on Response Spectrum Method. This analysis tool is written in MATLAB software to determine structural responses or a

Functions and subroutines for the Dynamic Linear Seismic Analysis (Time-History) of 2D Frames

DynamicLinear-Seismic-Analysis-2DFramesFunctions and subroutines for the Dynamic Linear Seismic Analysis (Time-History) of 2D Frames

This is utility to read SAC (Seismic Analysis Code) binary files created on/for SUN platform.

Functions and subroutines for the Static Seismic Modal analysis of 3D Frames

Static-Seismic-Modal-Analysis-3DFramesFunctions and subroutines for the Static Seismic Modal analysis of 3D Frames

Subroutines and functions for the Static Seismic Modal Analysis of 2D Frames

Static-Seismic-Modal-Analysis-2DFramesSubroutines and functions for the Static Seismic Modal Analysis of 2D Frames

Functions and routines for the dynamic inelar seismic analysis of 3D (Time-History)

Dynamic-Time-History-Seismic-Anlaysis-3DFramesFunctions and routines for the dynamic inelar seismic analysis of 3D (Time-History)

Analysis of Colombian ground motion records Javier Ardila & Angélica Fernández W Project advisors : Professors José Benjumea & Gustavo Chio

SedPro: This code allows the treatment, processing and calculation of seismic signal parameters.NewmarkRS and FFTsignal: complementary functions for the code

This method accurately approximates full-offset ray-traced traveltimes in a CMP acquisition, using only two rays.

Calculation of elastic and inelastic spectra, given the gound acceleration, damping and ductility.

Minimal Path Sets Seismic Reliability Evaluation of Lifeline Networks with Link and Node Failures

Seis_Pick provides an interactive picking environment for processing seismic data.

Seis_pick provides an interactive environment for picking seismic waveforms. It has been developed with the principal purpose of processing downhole microseismic data, although is suitable for all

SQUIGGLE stacked-line plot, typically used for plotting seismic and radar profiler data.

SQUIGGLE stacked-line plot, typically used for plotting seismic and radar profiler data.SQUIGGLE(Z) is a squiggle plot of each column in the matrix Z. Each value in Z is scaled to the maximum

Computation of co-seismic displacements due to a rectangular dislocation in an elastic half-space.

Computation of static co-seismic displacements due to a dislocation-type deformation in a half-spaceDescription: This exact solution is often used to construct co-seismic displacements due to an

Generation of artificial acceleration time histories consistent with given response spectrum

Deep Neural Networks, Stacked Auto Encoder, and Deep Auto Encoder with Extreme Learning Machine

Please citeNuha, Hilal H., Adil Balghonaim, Bo Liu, Mohamed Mohandes, Mohamed Deriche, and Faramarz Fekri. "Deep Neural Networks with Extreme Learning Machine for Seismic Data Compression." Arabian

Seismic Reservoir Modeling package

Seismic Reservoir Modeling MATLAB packageThe SeReM package includes five folders:Data: this folder contains six datasets used for the examples and the elevation dataset from Yellowstone National

Functions and subroutines for the Non-Linear Seismic Analysis of 3D Frames with the Newmark-Beta method

Dynamic-NonLinear-SeismicAnalysis-3DFramesFunctions and subroutines for the Non-Linear Seismic Analysis of 3D Frames with the Newmark-Beta method

Functions and subroutines for the Non-Linear Dynamic (Time-History) Seismic analysis of 2D Frames

Dynamic-NonLinear-SeismicAnalysis-2DFramesFunctions and subroutines for the Non-Linear Dynamic (Time-History) Seismic analysis of 2D Frames

Normalized spectrogram of a seismic acceleration

Normalized spectrogramNormalized spectrogram of a seismic accelerationNormalized spectrogram to seismic acceleration written in Matlab. The algorithm used is the following:1. Baseline

Beamforming toolbox for three-component seismic noise

providing estimates of surface wave dispersion curves, frequency-dependent wavefield composition, and the direction of arrival for different wave types and frequencies from ambient seismic noise. Compared to

Denoise multicomponent/color images with directional M-band dual-tree (Hilbert) wavelets

CrazyTremor is a MATLAB package for searching for triggered tremor or triggered earthquakes from a sizeable seismic dataset.

1.1 Introduction: CrazyTremor is a MATLAB package for searching for triggered tremor or triggered earthquakes from a sizeable seismic dataset. It was developed by Dr. Chunquan

Simple GUI application aimed at surface-consistent seismic static and amplitude correction. Interactive velocity model builder

G_SeisSimple 2D-Seismic data processing GUI applicationFunctionalitySEGY read/write (reads to binary file of format single)visualize data with three keys sortingsurface-consistent first arrival (or

GUI for calculating the seismic response of a three storey-building.

This script aims to provide the seismic response of a three-storey building when subjected to either a force applied at a user-specified location or to the strike of a ground acceleration. The floors

This function is used to plot seismic data in wiggles/wiggle-area

The function plot input data (2D matrix, each column represents a seismic trace) in wiggle/wiggle-area. You need to provide a 2D matrix with traces in columns as the first argument. Then you are able

VPSHA: Vector-valued probabilistic seismic hazard analysis for circular seismic sources

This MATLAB function conducts a vector-valued probabilistic seismic hazard analysis (VPSHA) by making use of the truncated Gutenberg-Richter recurrence model. It considers only a uniform circular

Calculate elastic response spectra based on Eurocode 8

This script calculates the elastic response spectra based on Eurocode 8 Part1 (EN 1998-1 : 2004), for zones of seismicity of Type 1 or 2, and for ground types A, B, C, D and E. The output Response

Process corrections, filters, Fourier Spectra and Response 1GL for seismic acceleration records files

Process corrections, filters, Fourier Spectra and Response 1GL for seismic acceleration records files

Function in matlab to calculate AI (Arias Intensity) parameter from a seismic accelerogram

Arias IntensityFunction in matlab to calculate AI (Arias Intensity) parameter from a seismic accelerogramUsageThe arias intensity function is defined by:ai = arias_intensity(t

Matlab application that finds main frecuency from seismic timeseries acceleration data using SH/SV Stockwell Transform/Nakamura method

HOVSRMatlab application that finds main frecuency from seismic timeseries acceleration data using SH/SV Stockwell Transform/Nakamura methodLicenseThis project is licensed under GPLv2

This Matlab function was developed to generate "Design Response Spectrum" based on the Iranian seismic standard named "Standard 2800".

Description in English:This Matlab function was developed to generate "Design Response Spectrum" based on the 4th edition of the Iranian seismic standard of the buildings named "Standard 2800". This

Stacking repeated records can improve the SNR of seismic, geo-radar, or NMR signals. Three methods of non-linear stacking are implemented.

Stacking repeated records can improve the signal-to-noise ratio (SNR) of seismic, geo-radar, or nuclear magnetic resonance measurements. Stacking usually employs a simple summation of amplitudes, but

Most loadings applied to the structure are in general form. Some example of general loadings are ground acceleration loads due to seismic ac

Most loadings applied to the structure are in general form. Some examples of general loadings are ground acceleration load due to seismic activities, wind loads, vehicle passing loads, etc.A solution

Komputasi Geofisika, Universitas Pertamina

: https://github.com/Metkom/OSGPUP/edit/master/seismic%20processing/seismic_velocity_depth.mCite: Wirantara, Putu Pasek; Nagara, Jeremy Adi Padma; Purwakusuma, Rachenda Pandu; Rahmah, Tazkia; Christofel, David (2018): Mencari Kecepatan dan Kedalaman Gelombang Seismik Refraksi. figshare