Community Profile

photo

Stefanie Schwarz

Last seen: Today Con actividad desde 2017

Statistics

  • Thankful Level 5
  • Knowledgeable Level 3
  • Revival Level 3
  • First Review
  • Knowledgeable Level 2
  • 6 Month Streak
  • First Answer

Ver insignias

Content Feed

Ver por

Respondida
How to open and plot .kml file in matlab
In R2021b and later, you could use the following functions from Mapping Toolbox to import a KML file and plot the markers on a w...

17 días hace | 0

Respondida
Can I get the Simulink model for programming quadcopter by MATLAB/Simulink , that’s making me controlling for flying minidrones by MATLAB/Simulink
To get access to the 'flightControlSystem' model, you will need to install MATLAB, Simulink, and the "Simulink Support Package f...

alrededor de 1 mes hace | 0

Respondida
Error building Simulink Real-Time with Bus Creator connect to File Log
Do any of the signals going into the File Log block come from an S-Function block? If yes, is it one developed by you or is it a...

2 meses hace | 0

Respondida
What means "xPC" from the xPC Target?
It means "any PC". However, please note that such "do-it-yourself" targets are no longer supported with Simulink Real-Time. Onl...

2 meses hace | 0

Respondida
Embedded Coder Support Package for Xilinx Zynq Platform cannot connect the laptop to the Zedboard.
Hello Yuzong, our documentation says that "The development computer network connection must be on the same subnet as the hardwa...

2 meses hace | 0

Respondida
Could not load/create parameter sets for "Tunable block and global parameter" in real-time application speedgoat
This appears to be a bug which occurs if a bus object has a boolean type bus element and the bus is used as a parameter in the a...

3 meses hace | 0

| aceptada

Respondida
what is fpga board manager
Please see the following documentation: https://www.mathworks.com/help/hdlcoder/ug/fpga-board-manager-reference.html

3 meses hace | 0

Respondida
'parpool' fails in deployed application
See the MATLAB Answers post below - it could also just be a problem of running the executable against an incorrect version of MA...

4 meses hace | 0

Respondida
Usage of Matlab 2017b: Import filename of Simulink-Model into generated HDL-file (usage of HDL-coder)
It is currently not possible to use macro-style keywords for custom header/footer comments with HDL Coder. We apologize if the ...

4 meses hace | 0

Respondida
No driver block was generated for port(s) mapped to interface "LEDs General Purpose" in the software interface model. error occurred
Hi Praveen, The message that you mention should merely be a note (not an error) that no driver blocks are generated for the sof...

4 meses hace | 0

Respondida
Can I download older versions of MCR?
Please also see: How do I install older update versions of MATLAB Compiler Runtime (MCR)? Can I obtain versions of MCR that ar...

5 meses hace | 0

Respondida
Problem with the Connecttion between Zybo Z7 20 and Matlab
The MathWorks Zynq Workflow does not support ZYBO Z7-20 out of the box. The Linux image that you downloaded at the time was desi...

5 meses hace | 0

Respondida
Blackbox Interface : Task "Build FPGA Bitstream" unsuccessful
To avoid this error message, try to specify the external source code as "Additional source files" in HDL Workflow Advisor. When ...

9 meses hace | 1

Respondida
Simulink Real-Time Build Error: Undefined identifier xPCLoadParamSetFile in xpcoptions.tlc
From what we know, this is an error that only appears after installing Speedgoat I/O Blockset. To prove this, run the following ...

10 meses hace | 0

Respondida
Error in importhdl how to solve?
Here is a list of supported constructs with importdhl: https://www.mathworks.com/help/hdlcoder/ug/supported-verilog-constructs-...

11 meses hace | 0

| aceptada

Respondida
Problem with Windows Management Instrumentation while compiling a DSpace program with a FPGA card (RTI Build Error)
The issue appears to with either Xilinx System Generator or dSPACE RTI. These tools are external to MathWorks. You may want to ...

11 meses hace | 0

Respondida
Efficiently update MATLAB App Designer GUI real time from Simulink
See also the following MATLAB Answers post for more up-to-date info: https://www.mathworks.com/matlabcentral/answers/517628-how...

11 meses hace | 0

Respondida
Simulink engine interface is not enabled.
This is probably due to a licensing problem. Please see the following answer: https://www.mathworks.com/matlabcentral/answers/1...

alrededor de 1 año hace | 0

Respondida
Simulink Engine Interface is not enabled
I suspect that this might be a licensing problem. For example, it could be that a network license key is unavailable. See also: ...

alrededor de 1 año hace | 0

| aceptada

Respondida
Index exceeds array bounds when trying to configure USRP Support Package
We assume that you are receiving this error message while trying to set up the USRP Radio using the Hardware Setup GUI. The erro...

alrededor de 1 año hace | 0

Respondida
How to run a code only up to a certain line?
Starting in R2021b, with our improved editor, there is also a new "Run to here" feature to run the code until to a certain line ...

alrededor de 1 año hace | 0

Respondida
Simulink Real-Time API for Microsoft .NET Framework @ 2020b
See also the following MATLAB Answers post: https://www.mathworks.com/matlabcentral/answers/1459179-can-i-use-xpcapi-dll-or-xpc...

alrededor de 1 año hace | 0

Respondida
SoC Builder: 'loading existing binaries' workflow fails with error: "Selected folder does not contain project information files"
Even if you would like to use the pregenerated bitstream, you need to follow all the steps in the example. This means that you h...

alrededor de 1 año hace | 0

Respondida
EtherCAT master in Simulink Desktop Real-Time
The short answer is no. Simulink Real-Time (SLRT) and Simulink Desktop Real-Time (SLDRT) are fundamentally different products an...

alrededor de 1 año hace | 0

Respondida
why this error "Unable to check out the Simulink Coder license which is required to generate code"?
See the following answer to troubleshoot license and installation issues with our Coder products: https://www.mathworks.com/mat...

alrededor de 1 año hace | 0

Respondida
Setup : FPGA in LOOP
The Xilinx tool edition that you need to install will most likely depend on the FPGA that you would like to use. See also: http...

alrededor de 1 año hace | 0

Respondida
What is the roadmap to updating MATLAB to use HDF5 1.10 or later?
We support HDF5 1.10.7 starting from release 2021b. See the release notes: https://www.mathworks.com/help/releases/R2021b/matla...

alrededor de 1 año hace | 0

| aceptada

Respondida
Does the 2020a version allow using the deploy function for deep learning models on macOS?
According to this documentation page, we don't support deployment of deep learning applications from Mac to Raspi as of R2021b: ...

alrededor de 1 año hace | 0

Respondida
How to deploy a matlab function to raspberry pi 3b+
According to this documentation page, we don't currently support deployment of deep learning networks from Mac to Raspi: https:...

alrededor de 1 año hace | 0

Respondida
In 2018b MATLAB version, Can SIMULINK files (.slx) be converted into Standalone applications(.exe)?
Please see the following answer. The recommended workflow is to upgrade MATLAB to R2020a or later and use Simulink Compiler: ht...

alrededor de 1 año hace | 0

Cargar más