Respondida
Matlab spmd Collecting Composite Arrays
You missed a crucial clue from your question - where are you assigning hx. I'm going to guess you have something like this: spm...

alrededor de 1 año hace | 1

| aceptada

Respondida
Matlab spmd and CoolProp (CPython library)
You need to avoid transferring the objects to the workers, and instead simply build the objects directly on the workers. The sim...

alrededor de 1 año hace | 0

| aceptada

Respondida
How to shut down all running workers of paarpools?
You can shut down all remaining workers of the currently running pool by executing: delete(gcp('nocreate')) There should be no...

alrededor de 1 año hace | 0

Respondida
Assigning values to a vector out of order in parallel (parfor)
One of the constraints of parfor is that indexed outputs like myVec must be "sliced" - that means that you must assign only elem...

alrededor de 1 año hace | 0

| aceptada

Respondida
Is it possible to create multiple parallel pools simultaneously
There's no direct way to do what you're after here. (As @Walter Roberson points out, you can have a backgroundPool and a parpool...

alrededor de 1 año hace | 1

| aceptada

Respondida
Cluster multi-gpu training Error: Current pool is not local.
I think you need to specify ExecutionEnvironment="parallel" for this situation. According to the trainingOptions reference page,...

alrededor de 1 año hace | 0

| aceptada

Respondida
Is is possible to run a batch job on an MJS Cloud Center cluster with SpmdEnabled set to false?
Unfortunately, this option is not supported at the moment for batch jobs. I realise it's probably rather a big change to your co...

alrededor de 1 año hace | 0

| aceptada

Respondida
I need help regarding parfeval implementation with object handle. I have created an object handle, the member functions of which i want to run as parallel processes.
The documentation here applies to parfeval as well as parfor in the sense that the object instances on the workers are not conne...

más de 1 año hace | 0

| aceptada

Respondida
How to avoid broadcast variable while optimizing a cost function in parallel computing?
Investigating performance of parfor loops can be a bit tricky. Here are a few pointers: Do you happen to know if your function ...

más de 1 año hace | 0

Respondida
parfor with temporary variable worning
I think there are a couple of problems here. Firstly, I think you need to change the way you're assigning into dcm_stack because...

más de 1 año hace | 0

| aceptada

Respondida
Can parfor be used if no Parallel Computing Toolbox licenses are available?
The implementation of parfor is intended to gracefully fall back to running in serial if a Parallel Computing Toolbox licence ca...

más de 1 año hace | 0

Respondida
Slicing variable in parfor loop
In this case, you don't actually have a data dependency between the loop iterations. You can use a parfor reduction to do this, ...

más de 1 año hace | 0

| aceptada

Respondida
GPU0 and GPU1 in matlab?
GPU Computing in MATLAB supports only NVIDIA devices, so your Intel graphics card cannot be used by gpuArray.

más de 1 año hace | 1

| aceptada

Respondida
Sliced Variables in N Choose K Search
This is a limitation of the parfor analysis when it comes to indexing sliced variables in a nested for loop. There is another wo...

más de 1 año hace | 0

| aceptada

Respondida
Use Parfoor Loop for Parameter Sweep Optimization
You can do this using a custom reduction function in parfor. Like this: p = 1:10; someFcn = @sin; % Use a 2-element vector to...

más de 1 año hace | 2

| aceptada

Respondida
SMPD block getting stuck and not executing
I suspect the problem here is that the way that you're using spmdSend and spmdReceive doesn't quite match how they work. When yo...

más de 1 año hace | 0

| aceptada

Respondida
How can I Ensure Transparency in parfor-Loops when using cell2table ?
Most of the table-building functions can have this problem if you do not specify 'VariableNames', like this (tested in R2019a): ...

más de 1 año hace | 2

Respondida
Parrallel run using parfor and institute server?
The problem with converting the outer loop to parfor is described in the error message that you get when you try: Error: When i...

más de 1 año hace | 0

Respondida
Incompatible indexing of variable for parfor
The total size in bytes of Network is 5*12*76*8 = 36480. That is tiny. Ignore the parfor "broadcast" warning - that is intended ...

más de 1 año hace | 0

Respondida
Minimum/maximum CUDA Toolkit requirement for R2022a
To run code using gpuArray, you do not need to install a CUDA Toolkit. You only need a CUDA driver. You should always* install t...

más de 1 año hace | 0

Respondida
Is there an easy way to find out which workers are running on the same host in a Generic Cluster job so I can efficiently allgather?
You can use gop to perform general MPI-style all-reduce operations, and a special case of that is gcat which can operate as an M...

más de 1 año hace | 0

| aceptada

Respondida
Unsure why parfor loop does not work in this case
The problematic variables appear to be both M and P. For M, you have multiple different "reads" from the variable after the init...

más de 1 año hace | 0

Respondida
Writing to .mat simultaneously with parfor loop
Don't attempt to save from multiple workers to the same file, this will sometimes fail (exactly when/how it fails depends on you...

más de 1 año hace | 2

| aceptada

Respondida
SPMD to process different iteration on different worker
It's not entirely clear to me quite what you're after. You might want for (drange) which spreads the iterations of a for loop ov...

más de 1 año hace | 0

Respondida
process based parpool: keep the data in the workers
Mike has already suggested looking at parfeval. The other option, which may be appropriate for your problem is to use spmd. This...

más de 1 año hace | 0

| aceptada

Respondida
GUI program with parfeval
You should be able to cause the GUI to update by using wait in a loop, together with drawnow. A bit like this: while ~wait(thre...

más de 1 año hace | 0

| aceptada

Respondida
Parfor loops indexing into table rows
There's a few things conspiring against you here. Firstly, parfor analysis doesn't understand how to "slice" table data using va...

más de 1 año hace | 1

| aceptada

Respondida
Discarded Messages with SPMD and labReceive ... why?
Using conditional receives in this way is not a robust way to get the workers to collaborate - you have an ordering problem that...

más de 1 año hace | 0

Respondida
How to set a background pool to process-based instead of thread-based
Unfortunately, as you have seen fopen is not yet supported on thread-based pools such as backgroundPool. There is no way to conf...

más de 1 año hace | 0

| aceptada

Respondida
parfeval with fetch not working
You cannot pass database connection objects to workers directly like this. You should use createConnectionForPool . There are ex...

más de 1 año hace | 2

| aceptada

Cargar más