Respondida
I want to plane fit my sperical data points.
Assuming a spherical surface with unknown origin (and perhaps radius), you can run an optimization algorithm to estimate the mod...

alrededor de 2 años hace | 0

| aceptada

Respondida
how to convert z parameter to s parameter?
Depending on which way you want to go: % Ohm to dB Z = 4.17; ZdB = 20 * log10(Z) % dB to ohm ZdB = 12.39; Z = 10^(ZdB / ...

alrededor de 2 años hace | 0

Respondida
How to replace NAN values in a string to a zero value
Your for-loop is not a valid MATLAB expression. It should probably be: for i = 1:n end When i == 0, VW(i) would not be vali...

alrededor de 2 años hace | 0

Respondida
how to smooth or filter the signal like this?
You can apply a low-pass filter to remove the noise in the signal before taking the Fourier Transform of the data: load('data.m...

alrededor de 2 años hace | 0

Respondida
Why am I receiving multiple database errors for a simple line of code?
Your for loop index, i, goes up to size(ALPI01.time) and you are trying to index into the (i+1)th entry of the variable ALPI01...

alrededor de 2 años hace | 0

| aceptada

Respondida
Why is my code not working?
The variables (ad, ag, etc.) that you need in your functions T(t), etc. need to be defined in the functions themselves. Also, f...

alrededor de 2 años hace | 0

Respondida
How do you do a sine transform in Matlab?
According to Wikipedia, versions of it can be computed using the discrete cosine transform: "A DST-III or DST-IV can be computed...

alrededor de 2 años hace | 0

Respondida
error illegal methods use
You seem to have a missing "end" around line 80-81 at the end of the "switch" block. You need an "end" at the end of the functio...

alrededor de 2 años hace | 0

| aceptada

Respondida
How can I use interp1 to interpolate the last row of a matrix?
Interpolation is probably not the right term here since interpolation, typically, requires a set of (x,y) data and a different s...

alrededor de 2 años hace | 0

Respondida
How to do PCA in Matlab?
You can use the pca command from the Statistics and Machine Learning Toolbox: https://www.mathworks.com/help/stats/pca.html. ...

alrededor de 2 años hace | 0

Respondida
Storing a portion of a signal for real time processing in Simulink
The typical approach to convert a sine wave to square wave is to use a Schmitt Trigger. Simscape library has a block for this, w...

alrededor de 2 años hace | 0

Respondida
How to program a push button which will display the graphs signal filter
You can set the Visible property of the line object handles to 'off' to hide them. Set them off in your button callback. x = (...

alrededor de 2 años hace | 1

Respondida
I want to ask about low pass filter in app design
It looks like you are showing the filtered image (an) on the same uiaxes as the original image, so they are overlapping. You wo...

alrededor de 2 años hace | 0

| aceptada

Respondida
How to add two conditions to a plot?
You had unmatched parentheses among other things. x = 1:10; u = rand(1,10); v = rand(1,10); AL = rand(1,10); BE = rand(1,10...

alrededor de 2 años hace | 0

| aceptada

Respondida
Not enough input arguments error/ int command/ integral calculation
Use the integral command, not int. The integral command does numerical integration. The int command is for symbolic integration....

alrededor de 2 años hace | 0

| aceptada

Respondida
how to pan stereo audio on Matlab
For stereo audio, your data has to be an n x 2 matrix. Then you can multiply each channel (column) by a weight between 0 and 1 t...

alrededor de 2 años hace | 0

| aceptada

Respondida
Sending a variable from MATLAB to Arduino
You have to call Serial.read() in loop() and not in setup(), since setup() is called only once when Arduino starts running. Also...

alrededor de 2 años hace | 1

| aceptada

Respondida
What is MathWorks's preferred way to receive product feedback?
You can Create Service Request and select the Technical Support option, which also includes suggestions: https://www.mathworks.c...

alrededor de 2 años hace | 2

| aceptada

Respondida
ERROR // Array indices must be positive integers or local values
In MATLAB, array indexing is 1-based, not 0-based. The first element of colorData, etc. would be colorData(1). Occasionally, ra...

alrededor de 2 años hace | 1

Respondida
How we can figure the Fast Fourier Transform of a district time history data?
Your sine function's frequency is not 5 Hz, it is 5 rad/sec. To get the frequency in Hz, multiply the argument to the sine funct...

alrededor de 2 años hace | 0

Respondida
How to get calibration values for my accelerometer
It looks like this IC has a 16-bit ADC. Depending on which acceleration range you select, the magnitude would be scaled as: ran...

alrededor de 2 años hace | 0

Respondida
Unable to change Marker Size in Scatter Plot
You just need to pick a good value: x = rand(10,1); y = rand(10,1); subplot(211) scatter(x,y) subplot(212) scatter(x,y,...

alrededor de 2 años hace | 1

Respondida
run a for loop for 240 minutes
% Runs for 5 seconds (i.e., 5/60 minutes) T = 5/60; % minutes ti = datetime('now'); tf = datetime('now'); while (minutes(tf-...

alrededor de 2 años hace | 2

Respondida
Is There a Command in MATLAB Like WorkingPrecision in MATHEMATICA?
Yes, if you have access to Symbolic Math Toolbox. See https://www.mathworks.com/help/symbolic/vpa.html. Otherwise, you will get ...

alrededor de 2 años hace | 1

Respondida
how to approximate set of point to a given function
This is an optimization problem that can be solved using fminsearch and a least-squares cost function. % "Unknown" model parame...

alrededor de 2 años hace | 1

Respondida
Vector range error in matlab
Works just fine for me: o = [2, 4, -3, 0, 1, 5, 7]; range(o) mean(o) median(o) You can do which -all range to see which r...

alrededor de 2 años hace | 0

Respondida
Plotting an evelope between high and low price forecasting
high = rand(10,1) + 2; low = rand(10,1); med = (high+low) / 2; year = (1:10)'; % Corners of the patch to paint. patch(......

alrededor de 2 años hace | 1

| aceptada

Respondida
How to color the colormap with a set of hexadecimal colors?
You can use a function like this in a loop: map = {'E1F2E3','CDE5D2','9CCEA7','6CBA7D','40AD5A','22BB3B','06592A'} N = numel...

alrededor de 2 años hace | 0

Respondida
I need to add and multiply a vetor
This looks like the dot product of the subvectors u(1:n-1) and u(2:end): u = cos(0:pi/20:pi); % Create the vector p = u(1:end-...

alrededor de 2 años hace | 1

Respondida
Display temperature reading of MAAX6675 on Matlab GUI via Arduino board
You will have to use the SPI interface of the Arduino support package to configure access to MAX6675: https://www.mathworks.com...

alrededor de 2 años hace | 0