Respondida
MONOPULSE SUM and DIFFERENCE Antenna Patterns
Thanks for the feedback, the example could use better description and figure. This being said, the pattern itself is not wro...

más de 8 años hace | 0

| aceptada

Respondida
how to specity axis using imagesc
You can just do imagesc(linspace(0,1,40),linspace(0,1,200),A) HTH

más de 8 años hace | 2

| aceptada

Respondida
Anonymous Function Array Output
You are returning two separate outputs, the instruction says "The output should be returned as a 1D array" HTH

más de 8 años hace | 1

Respondida
Generating C code from MATLAB functions
Could you share which release are you using? Looks like your script is generated from filterDesigner (or FDAToll)? If you are us...

más de 8 años hace | 1

Resuelto

How to subtract?
*&plusmn &plusmn &plusmn &plusmn &plusmn &plusmn &plusmn &plusmn &plusmn &plusmn &plusmn* * Imagine you need to subtract one...

más de 8 años hace

Respondida
fft dim parameter when ndims(x) > 2
If you have a multidimensional array x, say x = ones(3,4,5) then fft(x,[],3) will perform FFT on the dimension ...

más de 8 años hace | 0

| aceptada

Respondida
Repeat vector n times
Have you tried |repmat|, say n = 2; t_vec = [ion ion ioff ioff ioff]; repmat(t_vec,1,n) HTH

más de 8 años hace | 2

| aceptada

Respondida
How to avoid error calculation going to infinity when dividing by near-zero values?
There are several ways to handle this, for example, you can add one more line to set all those points to a predefined value ...

más de 8 años hace | 0

Respondida
Is there a simple code for matched filter?
You may want to take a look at the following thread <https://www.mathworks.com/matlabcentral/answers/4502-matched-filter> ...

más de 8 años hace | 0

Respondida
Rem function yields wrong output.
This is due to the round off error from floating point computation. The following link might be helpful <https://www.mathwork...

más de 8 años hace | 2

| aceptada

Respondida
Is there a way to extract numerical information on the antenna directivity as opposed to just visualizing it using the pattern command?
Yes, if you want the entire pattern, you can just specify an output, like [D,az,el] = pattern(array,fc,az,el,'Type','direct...

más de 8 años hace | 0

| aceptada

Respondida
How can we represent phased.waveform mathematically for sweep direction being up ?
The equation can be considered as x = exp(1i*2*pi*beta/2*t^2) where |beta| is |SweepBandwidth/PulseWidth|. HTH

más de 8 años hace | 0

Respondida
Filter design toolbox dont have quantization pane
Could you share the result of "ver" command? I think you need to have DSP System Toolbox to access that functionality. HTH

más de 8 años hace | 0

Respondida
What is the difference between designfilt and fdesign
Could you share which release you are using? You can find the info by runnig |ver| at the command prompt. HTH

más de 8 años hace | 0

Respondida
Beamforming using Frost beamformer
Below is a popular paper about Frost beamformer. It is also the reference used for Frost beamformer shipped in Phased Array Syst...

más de 8 años hace | 0

Respondida
How to use GUI to have some input values
How are you writing the GUI? In summary you need to write a callback function for the button so it knows what to do when you pre...

más de 8 años hace | 0

Respondida
how to find lomb periodogram in matlab
Have you tried |plomb|? <https://www.mathworks.com/help/signal/ref/plomb.html> HTH

más de 8 años hace | 0

| aceptada

Respondida
how to get fft of a signal?
The first figure is your signal, which has a DC component. You may want to remove that before running the FFT, like c = fft...

más de 8 años hace | 1

Respondida
How can I get the phase of the radiation pattern of a phased array?
Since you want a complex pattern, it will be a field pattern instead of power pattern. I would use ArrayResponse. Here is an exa...

más de 8 años hace | 0

Respondida
Direction of arrival estimation of a chirp (noised and attenuated) using Capon (MVDR) beamformer
If you have access to Phased Array System Toolbox, maybe you want to take a look at the following example. It may help you under...

más de 8 años hace | 0

Respondida
Undefined function 'pattern' for input arguments of type 'phased.ULA'.
In your release, you will have to use |plotResponse| instead. You should be able to find reference page for this function in the...

más de 8 años hace | 0

Respondida
Undefined function or variable 'Tw'
Looks like the issue is more on the |fprintf| line, not the function call. Indeed you are using variable name |Tw| in |fprintf| ...

casi 9 años hace | 0

Respondida
Split column data into two columns
Could you elaborate what you have as a matrix? If you are using character arrays, it should just be a 5-column matrix to star...

casi 9 años hace | 0

Respondida
我装完高阶谱的工具箱后每次启动matlab就弹出一个警告，说是INFO.XML不合法，请问这个怎么解决？
高阶谱工具箱是第三方工具箱，根据下面链接中的信息，最后更新是在2003年，所以它的info.xml可能不符合最新的格式。 <https://www.mathworks.com/matlabcentral/fileexchange/3013-hosa-...

casi 9 años hace | 1

| aceptada

Respondida
Convert Matrix to Vector in Simulink
You should be able to use Selector to do it. In your dialog, set Number of input dimensions to 2 set Index mode to one base...

casi 9 años hace | 0

Respondida
MIMO Multipath for specific array geometry
comm.MIMOChannel does not specify the array geometry directly. Rather it uses correlation matrix to include the array effect. To...

casi 9 años hace | 0

Respondida
Questions in FMCWExample about plotresponse and Nsweep
When you use a sweep time of 2 ms, as mentioned in the published example <https://www.mathworks.com/help/phased/examples/auto...

casi 9 años hace | 0

| aceptada

Respondida
How to plot loudspeaker frequency response from its impulse response?
Frequency response is the Fourier transform of the impulse response so you should be able to use |freqz| to compute it if you ar...

casi 9 años hace | 1

Respondida
target angle set up in a radar simulation without phase shifter
You should use |tgtang|. Note that what you do here is to synthesize the data. Therefore, even though the radar is not steering,...

casi 9 años hace | 0

| aceptada

Respondida
3D Rotation Matrix
I'm not sure if I fully follow your question, but here is my understanding. The first step is to find the coordinates of all po...

casi 9 años hace | 1

| aceptada