Respondida
how do I control duty cycle of a MOSFET using PI controller
So the output of the PID controller should output a duty cycle between 0 and 1. Then, this duty cycle can be passed into, for...

casi 9 años hace | 0

| aceptada

Respondida
Change simulink port location of signal after dragging block into "Create Subsystem"
It's the same block; you just have to rotate it and resize it to make it look like a "fresh" block. You can right-click the b...

casi 9 años hace | 0

| aceptada

Respondida
Fixing parameters when estimation of transfer function
There is a |setpar| function that lets you set whether or not the variables are free. For example, to have only the first 3 p...

casi 9 años hace | 0

Respondida
Parallelisation for ga with Simulink Model
This is happening because each worker needs to have the model loaded in memory, as well as all its dependencies added to path (a...

casi 9 años hace | 1

| aceptada

Respondida
If there is one Rate Transition Block following another Rate Transition Block, why is the first Block automatically set to "Copy" mode?
*Questions the sense of 2 consecutive Rate Transition blocks ...* If you look at the Rate Transition block documentation it s...

casi 9 años hace | 0

Respondida
I'm having trouble modeling with Simscape Multibody
This algebraic loop is happening because your Simscape Multibody interface is being done using Simulink signals. Since you're ap...

casi 9 años hace | 1

| aceptada

Respondida
Simulink/ROS: Publishing JointTrajectory Messages
I can only guess what's going on... Are you planning on sticking to desktop simulations from MATLAB or will you be generatin...

casi 9 años hace | 3

| aceptada

Respondida
Simulink mask using workspace variables
The mask has a separate workspace, so what you need to do is get the values from the base workspace before using them. There ...

casi 9 años hace | 5

| aceptada

Respondida
How to propel a multibody vehicle by a DC motor?
You can use the <https://www.mathworks.com/matlabcentral/fileexchange/37636-simscape-multibody-multiphysics-library Simscape Mul...

casi 9 años hace | 0

Respondida
Can I override the behaviour of the console output that is printed when I access the member of a class member (without semicolon)?
Absolutely -- you can overload the |disp| method of that class as shown <https://www.mathworks.com/help/matlab/matlab_oop/displa...

casi 9 años hace | 0

Respondida
Simulate autonomous robot with distance sensors
Actually, MATLAB does not yet have an official built-in robotics simulator. However, there is a lot out there you can use as a s...

casi 9 años hace | 0

Respondida
How could I connect simulink model to the genetic algorithm toolbox ?
It's all in your cost function. For example: function cost = costFunction(params) myValue1 = params(1); myV...

casi 9 años hace | 1

Respondida
Designing a DC-DC converter using Simscape
There are a lot of examples in the Simscape (and add-on products) documentation. If you want to do a more idealized system-le...

casi 9 años hace | 0

Respondida
Is "fixed-displacement pump" in Simscape still available in R2017 version?
Hi Adam, I just tried finding the blocks and the engine cooling example in R2017a and it works fine for me. Indeed, if I s...

casi 9 años hace | 0

| aceptada

Respondida
Controlled resistor in simpowersystem?
The block you dragged in is from a different library which doesn't connect directly to Simscape Power Systems Specialized Techno...

casi 9 años hace | 0

Respondida
nonlinear plant model in matlab
You can use ordinary differential equation (ODE) solvers in MATLAB by specifying the relationship between |ydot| and |y|. Se...

casi 9 años hace | 0

| aceptada

Respondida
How to generate random stable state space?
Yes, you can! >> A = rss(100) <https://www.mathworks.com/help/control/ref/rss.html> - Sebastian

casi 9 años hace | 0

| aceptada

Respondida
Why doesn't the scope in simulink show the full stepresponse?
The default simulation stop time of a Simulink model is 10 seconds (you should see a "10" in the toolbar near the top of the mod...

casi 9 años hace | 1

| aceptada

Respondida
I would like to change gain every step / to be a function of time for my TF, is this possible somehow?
Instead of a Gain block, use a Product block... then, pass in the "gain", which is now one of the 2 inputs of the Product block,...

casi 9 años hace | 0

| aceptada

Respondida
How to i find the integral/derivative of a transfer function ?
Are you using Control System Toolbox? Recall that the transfer function for a derivative is |s| and for an integrator is |1/s|. ...

casi 9 años hace | 1

| aceptada

Respondida
Ho to convert a signal from discrete to continuous in Simulink block diagram?
Even better! In Simulink, you don't need to convert your plant model to a discrete system. If your controller block(s) are di...

casi 9 años hace | 1

Respondida
How can I set input value and output value of a StartFcn?
Did you try it? Because it works fine for me. Pretty sure the value of a model's |StartFcn| parameter is just a free-form str...

casi 9 años hace | 0

Respondida
how to applySVM classifier on dataset in xls form
You can import the data into MATLAB either graphically using the <https://www.mathworks.com/help/matlab/import_export/select-spr...

alrededor de 9 años hace | 0

Respondida
Flow chart in simulink
If you want iterations in your flow chart, as in a FOR-loop, you can create one using the pattern wizard. See below: <https:/...

alrededor de 9 años hace | 0

Respondida
How to save custom Simscape blocks?
Assuming your code is correct, all you have to do is change the extension of |varconvection.m| to |varconvection.ssc|. Simsca...

alrededor de 9 años hace | 0

| aceptada

Respondida
Code to check stabilty with routh method
There are tons of submissions for this on File Exchange, such as this one: <https://www.mathworks.com/matlabcentral/fileexcha...

alrededor de 9 años hace | 0

Respondida
OOP: Object gone out of scope!
This is expected. |x| is a local variable to the constructor, so it will go out of scope after instantiating the object. You ...

alrededor de 9 años hace | 0

| aceptada

Respondida
Is there a fault in the equation of the piston mechanism? (Simscape, Piston, Piston Engine)
At a glance, you seem to be correct. I looked at the underlying code in the block and it seems the equations are implemented cor...

alrededor de 9 años hace | 1

| aceptada

Respondida
Use mldivide in SIMULINK
Since you're using a square A matrix, you should be able to use the Divide block (Simulink > Math Operations). If you set its "M...

alrededor de 9 años hace | 3

| aceptada

Respondida
Why does matlab skip my if statement
This is a common issue when working with floating-point numbers, and I would first refer you to this answer: <https://www.mathwo...

alrededor de 9 años hace | 0