Community Profile

photo

Jason Ghidella

Last seen: 4 días hace |  Con actividad desde 2004

Followers: 0   Following: 0

Contacto

Estadísticas

All
  • Knowledgeable Level 1
  • First Answer
  • Solver

Ver insignias

Feeds

Ver por

Resuelto


Produce a sine wave
Produce a sine wave with amplitude 3: <<http://blogs.mathworks.com/images/seth/cody/sine-eqn.png>>

alrededor de 7 años hace

Resuelto


Add a block to a model
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/add-block-eqn.png>> In this case, the slope of...

más de 8 años hace

Resuelto


Produce a cosine wave
Produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/cosine-eqn.png>>

más de 8 años hace

Resuelto


Connect blocks in a model
Connect the blocks in the model to produce the following signal: <<http://blogs.mathworks.com/images/seth/cody/connect-blocks...

más de 8 años hace

Respondida
Parameterize Simulink Goto and From
Hi Aaron, I have a few extra questions that would help me answer your question. First, the parameter name for the goto and ...

alrededor de 9 años hace | 0

Respondida
Simulink model working with 2010a gives an error in 2014b
Hi Srinath, You have not defined the parameter pdia. This parameter is needed in the constant block. You can assign a value...

más de 9 años hace | 0

Respondida
Comparator block in simulink
An alternative is to use the built-in block "Relational Operator" block from the Logic and Bit Operations library in Simulink. T...

alrededor de 11 años hace | 2

Respondida
simulink and m file connection
What you need to do is use |set_param| end to set the values of Simulink parameters from the GA objective function, and have an ...

alrededor de 11 años hace | 1

Respondida
how can i extract video frames through simulink
Have you looked at the Computer Vision System Toolbox? It works with both MATLAB and Simulink. Here is an overview video for...

alrededor de 11 años hace | 0

Respondida
How to add a Stateflow chart in an existing Simulink model using API?
You can use the add_block function to add a Stateflow chart to an existing subsystem. doc reference: http://www.mathworks.c...

más de 11 años hace | 2

| aceptada

Resuelto


Times 2 - START HERE
Try out this test problem first. Given the variable x as your input, multiply it by two and put the result in y. Examples:...

alrededor de 12 años hace

Enviada


Examples of incorporating m-code into Simulink models
Example Simulink models to support a MATLAB Digest article from September 2004.

más de 19 años hace | 11 descargas |