Respondida
Why do these methods to obtain the simulink model transfer functions return different results?
Hi BW, Define PI and F s = zpk('s'); PI = 1 + 2/s; F = 6; In the first case, the linerarizer computes the transfer functio...

5 meses hace | 1

| aceptada

Respondida
Simulink 3D matrix interpolation using pre-lookups
Hi Alborz, It looks like you're switching between 6x5 and 5x6 in your post. Assumign that a) the table is 6 x 5 x 2 as in the ...

5 meses hace | 0

| aceptada

Respondida
Are there any alternatives to try/catch statements that are supported by code generation?
Hi Roop, Can you post the code of a simple Matab Function that illustrates how you're tyring to use a try/catch? I'm having tro...

5 meses hace | 0

| aceptada

Respondida
Reconstruct time series from FFT components. There is a time shift error.
Hi Haifei, You may want to investigate why the data is not uniformly sampled and how that impacts the analysis. Does the other ...

5 meses hace | 0

| aceptada

Respondida
Simulink - How to create a conditional "if" block
Perhaps you can use a Relay block to model the desired behavior based on the heating/cooling analogy. The output of the Relay ca...

5 meses hace | 0

| aceptada

Respondida
Why do we use ifft instead of fft when looking at the spectrum of a sech pulse (uu) in this code?
Hi Siheon, Your interpretation of fft as going from time to frequency, and ifft as going from frequency to time, with fft and i...

5 meses hace | 0

| aceptada

Respondida
Is enabled subsystem confusing? (Enable Port)
Hi Ahmed, To me that looks like an error in the documentation. That parameter controls what happens to the states inside the su...

5 meses hace | 0

| aceptada

Respondida
Discrete convolution in time/Laplace domain
Simplest and most efficient approach would be to compute samples r_i = r(i*T) where T is the sampling period and then use conv t...

5 meses hace | 1

| aceptada

Respondida
Is the "kinematicTrajectory" function correct for calculating angular velocity?
Hi Erik, The code is comparing two different quantities: Here, T is the matrix that mutliplies the angular velocity vector res...

5 meses hace | 0

| aceptada

Respondida
Extracting Data from an Array of Arrays using a Loop?
Hi Kylen, To make sure I understand correctly .... at the end of the processing you have a variable called 'out' and it is an a...

5 meses hace | 0

| aceptada

Respondida
How to use previous answer in new calculation n times
A=[0.3 -0.2; -0.6 0.8]; B=[-14;2]; x=[1;2]; sys = ss(A,B,eye(2),0,-1); y = lsim(sys,ones(11,1),0:10,x); % y0 = x %y...

5 meses hace | 2

Respondida
Frequency response of a system operating at a fixed frequency
Hi Alberto, Conceptually, what you're doing is correct (though there are other alternatives to the input signal). Keep in mind ...

5 meses hace | 1

Respondida
Designfilt and bandstopfir adds +320dB for some reason
Hi Andres, I don't have a complete answer, just an observation. Here's the original design with order 301 filterObject1 = des...

6 meses hace | 0

| aceptada

Respondida
hey so i need to repeat the code everytime to see and analyze the time responses for 20 different values of k. How can i do it at once and have the output for all the values?
Or use a model array plant = tf(20,[1 1 5]); k = realp('k',1); sys = feedback(k*plant,1); sysarr = sampleBlock(sys,'k'...

6 meses hace | 1

Respondida
Even & Odd Discrete time Signals
Matlab doesn't support zero or negtaive indices, so it won't be possible to implement this operation using ordinary vector index...

6 meses hace | 0

Respondida
Digital filter with lowpass, then filtfilt: different output
lowpass calls filtfilt (or executes code equivalent to filtfilt) only if the underlying filter is IIR. If it's FIR, as in the qu...

6 meses hace | 0

Respondida
Assertion block does not stop simulation if I run the model with "sim" function
According to this doc page, pausing a simualtion while it's running is not supported when using the sim command. If in your act...

6 meses hace | 0

Respondida
HELP! Error using plot Vectors must be the same length. Error in Doc (line 94) plot(t, y);
Hi Matheus, The explanation for the error is that the fftm function is doing a "one-sided" FFT, hence it returns an output with...

6 meses hace | 0

| aceptada

Respondida
Scaling of Filter Coefficients in "fir1" function
For a FIR filter H(z) = b0 + b1*z^-1 + b2*z^-2 .... + b_n*z^(n-1) its frequency response is H(w) = b0 + b1(exp(-1j*w) + b2*e...

6 meses hace | 0

| aceptada

Respondida
The real implementaion of the C2D function "Control Systems Toolbox"
Hi Youssef, There are two files named c2d.m which -all c2d I believe the code listed in the question is of the former. The la...

6 meses hace | 0

Respondida
How does one solve equations between symbolic functions for functions
Maybe isolate is the solution ... syms z(t) theta(t) r eqn = z(t)-r*sin (theta(t)) == 0 z(t) = rhs(isolate(eqn,z(t)))

6 meses hace | 0

| aceptada

Pregunta

Why Does numel() Accept More than One Argument?
@doc:numel indicates that the function accepts only a single argument. But it can be called with more than one argument and it r...

6 meses hace | 1 respuesta | 1

1

respuesta

Respondida
Force symbolic simplification to eliminate variable
Hi ludolfusexe, Try equationsToMatrix load ddddh_fun symvar(ddddh_fun) syms u % A*u = b [A,b] = equationsToMatrix(ddddh_fu...

6 meses hace | 0

| aceptada

Respondida
Band-pass filter extraction.
Hi Claudio, Start with the original code Inertial_period = 20.215; K1_period = 24; % K1 period (hours) M2_period = 12; In...

6 meses hace | 1

Respondida
How to make variables assigned to SimulationInput object accessible to a PostSimFunction when using parsim
Hi Afzal, I think that the simOut from the simulation being called with sim is the argument sent into the PostSimFcn. Does the ...

6 meses hace | 0

| aceptada

Respondida
Data type symfun (code problem)
Hi Patryk, Works o.k. here. What version of Matlab are you using? syms x f(x) = x^(3/5) * (4 - x)^(1/3); df(x) = diff(f(x));...

6 meses hace | 0

Respondida
UAV Toolbox - Reference Frame Definition
In reference to the example on the linked page, I assume the waypoints are specified in the waypoint trajectory reference frame....

6 meses hace | 0

| aceptada

Respondida
Fourier Series,Spectral Analysys
Define the function over one period T0 = 1; % period f0 = 1/T0; syms t s(t) = rectangularPulse(.2,0.8,t); figure fplot(s(t...

6 meses hace | 1

Respondida
Read excel data in Simulink and convert it into an array
Add the line coder.extrinsic('readmatrix'); at the top of the Matlab Function after the %#codegen directive. Or, read in the ...

6 meses hace | 0

Pregunta

Why Does dcm2angle Work Like This?
Suppose I have a direction cosine matrix, brought to my attention by a colleague C = round(angle2dcm(-pi/2,-pi/2,0,'ZYX')) Ext...

6 meses hace | 0 respuestas | 0

0

respuestas