Respondida
"Unrecognized method, property, or field 'Type' for class 'matlab.ui.control.WebComponent'."
I think app.tabFiles.Children is an array of handles. Try tf = strcmp(get(app.tabFiles.Children,'Type'), 'uistatebutton')

alrededor de 2 meses hace | 0

| aceptada

Respondida
The code is correct, however I keep getting this error: Invalid color, marker, or line style.
See the possible marker symbol and line symbol help plot Various line types, plot symbols and colors may be obtained with P...

alrededor de 2 meses hace | 0

| aceptada

Respondida
'Could not determine the size of this expression' in simulink function block
In general, it is better to specify the size (number of rows and columns) of all the inputs, outputs and parameters that are use...

alrededor de 2 meses hace | 0

| aceptada

Respondida
variable duty ratio to a switch at different time intervals
I assume this is in Simulink. You can use an AND logic block or Product block to multiply two signals. One is the regular 40% du...

alrededor de 2 meses hace | 0

| aceptada

Respondida
How to use Workspace Variable value instead Sldd value in Simulink model.
Check the "Enable model access to base workspace" at Model Property, External Data tab? https://www.mathworks.com/help/simulink...

alrededor de 2 meses hace | 0

| aceptada

Respondida
Is there a nice way to discretely simulate an LTI system using a function block in Simulink?
Yes. For sys = ss(A,B,C,D,ts), the following equation should be used to advance the simulation step by step. Make sure to use c2...

alrededor de 2 meses hace | 0

| aceptada

Respondida
How can I solve this error??
There is nothing wrong in these commands. The simulation was being started but there is problem in your scenaio. Switch to the...

alrededor de 2 meses hace | 1

| aceptada

Respondida
Building an array of strings that might be empty
That is because app.XminEditField.Value and etc are char array, not string use string() s=["a","","b","c"] c=['a','','b','ded...

alrededor de 2 meses hace | 0

Respondida
How computationally intensive are switch case action blocks in Simulink?
Yes. More cases will not increase the computation load. Only the activated cases will be executed. It is called the Condtionally...

alrededor de 2 meses hace | 0

| aceptada

Respondida
How to get variable from Simulink model workspace for use with Multiple Simulations?
I think you are looking for model parameter argument. Follow this Q&A. https://www.mathworks.com/matlabcentral/answers/2101666-...

alrededor de 2 meses hace | 0

Respondida
How to fix this error? : Error:Index exceeds the number of array elements. Index must not exceed 4.
All the Winding parameters need to have 5 elements (including both the left and right side). You have only 4.

alrededor de 2 meses hace | 0

| aceptada

Respondida
Is it possible to use a parameter within the "To Workspace" block?
I remember answering the same question before. The answer is "No" by value passing, but you could do it using set_param(). For ...

alrededor de 2 meses hace | 0

Respondida
Any good resources on how to use "Matrix Interpolation" block in simulink?
What you need is the "2-D Lookup Table" block. Drag that from the library and select "Nearest" at the "Algorithm" tab. The Help ...

alrededor de 2 meses hace | 0

| aceptada

Respondida
In GUI, RangeSlider 's Value may have a wrong type
No confusion. You will find X = app. FilterHzSlider.Value; X is returned as [50 1000]. So you would do minFrq=X(1); maxFrq...

alrededor de 2 meses hace | 1

| aceptada

Respondida
Function call failed when calling matlab function inside function block
Okay, fg_chua() is generated by matlabFunction(). You need to specify the size of ux in the MATLAB Function block. Open the MAT...

alrededor de 2 meses hace | 0

| aceptada

Respondida
How to change the parameter value at run time in Matlab Simulink
This is not "change the parameter value at run time". Rather, it is to mimic a dynamic signal. You can use many of the blocks in...

alrededor de 2 meses hace | 0

Respondida
Loading table from object from .mat file
If the table object in that .mat file is called MyTable, then after ParaDat=load('ParameterDatabase.mat'), you can access it by ...

alrededor de 2 meses hace | 1

| aceptada

Respondida
How to create a string array and access the elements without throwing "COMMAND must be a string scalar or character vector" error?
This error might be particular to the GBMD.loadDumpFile(). Can you try either one of these Make a temp variable, such as tempVa...

alrededor de 2 meses hace | 1

| aceptada

Respondida
change the value of a data structure field
s(3).Val='1'; s.Val [s.Val]=deal('2') s.Val

alrededor de 2 meses hace | 0

| aceptada

Respondida
Global variables in simulink - embedded coder
I think you can try this block. Put it inside the Subsystem and specify the sample time as -1, which inherits the interrupt. ht...

alrededor de 2 meses hace | 0

Respondida
Is there a way to change my simulink parameters at a pre-set time during the simulation?
There are ways but you are looking for "an easy way". Typically I would implement this in the model using the Step block. For e...

alrededor de 2 meses hace | 1

| aceptada

Respondida
How to determine sets with only unique values across the columns of a large logical array?
Since it is comparing just two columns,I think you have to use loop. Utilize the logical(),all() and any() function. matrix =[0...

alrededor de 2 meses hace | 0

| aceptada

Respondida
problem with matlab function in simulink (inpunt problem)
From the diagram, "Tt" and "Pt" are the 1st and 2nd input From the function code, "Tt" and "Pr" are the 1st and 2nd input, whil...

alrededor de 2 meses hace | 0

Respondida
How to convert custom simulink blocks (with inports and outports created for accessing hardware interfaces) inside a subsystem into non-virtual blocks?
Select the Subsystem block, right click, select "Block Parameters (Subsystem)", check "Treat as atomic unit". This is one of th...

alrededor de 2 meses hace | 0

Respondida
Programmatic setting of Argument attribute for parameter in Simulink model workspace
set_param('ModelName','ParameterArgumentNames','a,b,g') where a,b,g are the name of the variables. See also https://www.mathwor...

alrededor de 2 meses hace | 0

Respondida
how to access internet web browser
Run this in MATLAB Command Window web('mathworks.com')

alrededor de 2 meses hace | 1

Respondida
How Do I send a variable sized array from simulink to matlab workspace (using continuous time and without altering the sample time) ?
See the "Variable-size signal" example model. https://www.mathworks.com/help/releases/R2021b/simulink/slref/toworkspace.html

alrededor de 2 meses hace | 0

Respondida
How to select variant within a model reference?
Combine this with model parameter for the model reference? https://www.mathworks.com/help/simulink/ug/mask-a-variant-subsystem....

alrededor de 2 meses hace | 0

Respondida
How to read To Workspace block signal value to App Designer ?
Likely it is caused by this Signal1 = get_param('mymodel.slx/To Workspace1','VariableName') gives you a char array containing t...

2 meses hace | 0

| aceptada

Respondida
Stateflow while-logic dead loop
When input==1, you do have an infinite loop, right? Connecting the feedback transition to the bottom junction would resolve it....

2 meses hace | 0

| aceptada

Cargar más