Orbit Propagator Kepler (unperturbed)
Propagate orbit of one or more spacecraft using Kepler universal variable formulation
Since R2020b
Libraries:
Aerospace Blockset /
Spacecraft /
Spacecraft Dynamics
Alternative Configurations of Orbit Propagator Kepler (unperturbed) Block:
Orbit Propagator Numerical (high precision)
Description
The Orbit Propagator Kepler (unperturbed) block propagates the orbit of one or more spacecraft using the Kepler universal variable formulation. The Orbit Propagator Kepler (unperturbed) and Orbit Propagator Numerical (high precision) blocks are alternative configurations of the same block.
Orbit Propagator Kepler (unperturbed) — Kepler universal variable formulation (quicker)
Orbit Propagator Kepler Numerical (high precision) — More accurate
The Orbit Propagator Kepler (unperturbed) block does not take into account atmospheric drag, third body gravity, or solar radiation pressure. For orbit propagations that take these effects into account, see the Orbit Propagator Numerical (high precision) block.
The size of the provided initial conditions determines the number of spacecraft being modeled. If you supply more than one value for a parameter in the Orbit tab, the block outputs a constellation of satellites. Any parameter with a single provided value is expanded and applied to all the satellites in the constellation. For example, if you provide a single value for all the parameters on the block except True anomaly, which contains six values, the block creates a constellation of six satellites, varying true anomaly only.
The block applies the same expansion behavior to input port A_icrf (applied acceleration). This port accepts either a single value expanded to all spacecraft being modeled, or individual values to apply to each spacecraft.
For more information on the propagation methods the Orbit Propagator blocks use, see Orbit Propagation Methods.
You can define initial orbital states in the Orbit tab as:
A set of orbital elements
Position and velocity state vectors in International Celestial Reference Frame (ICRF) or fixed-frame coordinate systems.
The block uses quaternions, which are defined using the scalar-first convention.
For more information on the coordinate systems the Orbit Propagator blocks use, see Coordinate Systems.
Examples
Constellation Modeling with the Orbit Propagator Block
Propagate the orbits of a constellation of satellites and compute and visualize access intervals between the individual satellites and several ground stations.
Mission Analysis with the Orbit Propagator Block
Compute and visualize line-of-sight access intervals between satellites and a ground station.
Lunar Mission Analysis with the Orbit Propagator Block
Compute and visualize access intervals between the Apollo Command and Service module and a rover on the lunar surface. The module's orbit is modeled using Reference Trajectory #2 from the NASA report Variations of the Lunar Orbital Parameters of the Apollo CSM-Module [2]. This is a lunar orbit studied by NASA for the Apollo program. The example uses:
High Precision Orbit Propagation of the International Space Station
Propagate the order of the International Space Station (ISS) using high precision numerical orbit propagation.
Ports
Output
Xicrf — Position of spacecraft
3-element vector | numSat-by-3
Position of the spacecraft with respect to (ICRF or fixed-frame), returned as a 3-element vector or numSat-by-3 array, where m is number of spacecraft, at the current time step. The size of the initial conditions provided in the Orbit tab control the port dimension. numSat is the number of spacecraft.
Data Types: double
Vicrf — Velocity
3-element vector | numSat-by-3 array
Velocity of the spacecraft with respect to ICRF or fixed-frame, returned as a 3-element vector or numSat-by-3 array, at the current time step. numSat-by-3 array. The size of the initial conditions provided in the Orbit tab control the port dimension.
Data Types: double
tutc — Time at current time step
scalar | 6-element vector
Time at current time step, returned as a:
scalar — If you specify the Start data/time parameter as a Julian date.
6-element vector — If you specify the Start data/time parameter as a Gregorian date with six elements (year, month, day, hours, minutes, seconds).
This value is equal to the Start date/time parameter value + the elapsed simulation time.
Dependencies
To enable this parameter, select the Output current date/time (UTC Julian date) check box.
Data Types: double
Parameters
Main
Propagation method — Orbit propagation method
Kepler (unperturbed)
| Numerical (high precision)
Orbit propagation method, specified as:
Kepler (unperturbed)
— Uses a universal variable formulation of the Kepler problem to determine the spacecraft position and velocity at each time step. This method is faster thanNumerical (high precision)
.Numerical (high precision)
— Determine the spacecraft position and velocity at each time step using numerical integration. This option models central body gravity based on the settings in the Central body tab. This method is more accurate thanKepler (unperturbed)
, but slower.
Programmatic Use
Block Parameter:
propagator |
Type: character vector |
Values:
'Kepler (unperturbed)' | 'Numerical (high
precision)' |
Default:
'Kepler (unperturbed)' |
Input external accelerations — Input additional accelerations
off (default) | on
To enable additional external accelerations to be included in the integration of the spacecraft equations of motion, select this check box. Otherwise, clear this check box.
Dependencies
To enable this check box, set Propagation method to
Numerical (high precision)
.
Programmatic Use
Block Parameter:
accelIn |
Type: character vector |
Values:
'off' | 'on' |
Default:
'off' |
External acceleration coordinate frame — Frame for additional accelerations
ICRF
(default) | Fixed-frame
Input additional accelerations, specified as ICRF
or
Fixed-frame
. These accelerations are included in
integration of the spacecraft equations of motion.
Dependencies
To enable this parameter:
Set Propagation method to
Numerical (high precision)
Select the Input external accelerations check box
Programmatic Use
Block Parameter:
accelFrame |
Type: character vector |
Values:
'ICRF' | 'Fixed-frame' |
Default:
'ICRF' |
State vector output coordinate frame — Port coordinate frame
ICRF
(default) | Fixed-frame
Coordinate frame for output ports, specified as ICRF
or
Fixed-frame
. These port labels are affected:
Output port X
Output port V
Dependencies
To enable this parameter, set Propagation method to
Numerical (high precision)
.
Programmatic Use
Block Parameter:
outportFrame |
Type: character vector |
Values:
'ICRF' | 'Fixed-frame' |
Default:
'ICRF' |
Start date/time (UTC Julian date) — Initial start time for simulation
juliandate (2020, 1, 1, 12, 0, 0)
(default) | valid scalar Julian date | valid Gregorian date including year, month, day, hours, minutes, seconds as
6-element vector
Initial start date and time of simulation, specified as a Julian or Gregorian date. The block defines initial conditions using this value.
Tip
To calculate the Julian date, use the juliandate
function.
Programmatic Use
Block Parameter:
startDate |
Type: character vector |
Values: 'juliandate(2020, 1, 1,
12, 0, 0)' | valid scalar Julian date | valid Gregorian date including
year, month, day, hours, minutes, seconds as 6-element vector |
Default:
'juliandate(2020, 1, 1, 12, 0, 0)' |
Output current date/time (UTC Julian date) — Add output port tutc
on (default) | off
To output the current date or time, select this check box. Otherwise, clear this check box.
Programmatic Use
Block Parameter:
dateOut |
Type: character vector |
Values:
'off' | 'on' |
Default:
'off' |
Action for out-of-range input — Out-of-range block behavior
Warning
(default) | Error
| None
Out-of-range block behavior, specified as follows:
Action | Description |
---|---|
None
| No action. |
Warning
| Warning in the Diagnostic Viewer, model simulation continues. |
Error (default) | Error in the Diagnostic Viewer, model simulation stops. |
Programmatic Use
Block Parameter:
action |
Type: character vector |
Values: 'None' |
'Warning' | 'Error' |
Default:
'Warning' |
Orbit
Define the initial states of the space craft.
Initial state format — Input method for initial states of orbit
Orbital elements
(default) | ICRF state vector
Input method for initial states of orbit, specified as Orbital
elements
or ICRF state vector
.
Programmatic Use
Block Parameter
stateFormatKep |
Type: character vector |
Values:
'Orbital elements' | 'ICRF state
vector' |
Default:
'Orbital elements' |
Orbit Type — Orbit classification
Keplerian
(default) | Elliptical equatorial
| Circular
| Circular equatorial
Orbit classification, specified as:
Keplerian
— Model elliptical orbits using six standard Keplerian orbital elements.Elliptical equatorial
— Define an equatorial orbit, where inclination is 0 or 180 degrees and the right ascension of the ascending node is undefined.Circular
— Define a circular orbit, where eccentricity is 0 and the argument of periapsis is undefined.Circular equatorial
— Define a circular orbit, where eccentricity is 0 or 10 degrees. Argument of periapsis and the right ascension of the ascending node are undefined.
Dependencies
To enable this parameter, set Initial state format to
Orbital elements
.
Programmatic Use
Block Parameter:
orbitType |
Type: character vector |
Values:
'Keplerian' | 'Elliptical equatorial' |
'Circular inclined' | 'Circular
equatorial' |
Default:
'Keplerian' |
Semi-major axis — Half of major axis of ellipse
6786000 (default) | 1D array of size numSat
Half of ellipsis major axis, specified as a 1D array whose size is the number of spacecraft.
For parabolic orbits, this block interprets this parameter as the periapsis radius (distance from periapsis to the focus point of orbit).
For hyperbolic orbits, this block interprets this parameter as the distance from periapsis to the hyperbola center.
Dependencies
To enable this parameter, set Initial state format to
Orbital elements
.
Programmatic Use
Block Parameter:
semiMajorAxis |
Type: character vector |
Values: scalar | 1D array of size m, number of spacecraft |
Default:
'6786000' |
Eccentricity — Deviation of orbit
0.01 (default) | scalar | value between 0
and 1
, or greater than
1
for Keplerian orbit type | 1D array of size numSat
Deviation of the orbit from a perfect circle, specified as a scalar or 1D array of size that is number of spacecraft.
If Orbit type is set to Keplerian
,
value can be:
0
for circular orbitBetween
0
and1
for elliptical orbit1
for parabolic orbitGreater than
1
for hyperbolic orbit
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit type to
Keplerian
orElliptical equatorial
.
Programmatic Use
Block Parameter:
eccentricity |
Type: character vector |
Values:
0.01 | scalar | value between 0 and
1 , or greater than 1 for Keplerian orbit
type | 1D array of size numSat |
Default:
'0.01' |
Inclination (deg) — Tilt angle of orbital plane
50 (default) | scalar | 1D array of size numSat | degrees between 0 and 180 | radians between 0 and pi
Vertical tilt of the ellipse with respect to the reference plane measured at the ascending node, specified as a scalar or 1D array of size numSat, in specified units. numSat is the number of spacecraft.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
Orbit type to
Keplerian
orCircular inclined
Programmatic Use
Block Parameter:
inclination |
Type: character vector |
Values: 50 | scalar | 1D array of size numSat | degrees between 0 and 180 | radians between 0 and pi |
Default:
'50' |
RAAN (deg) — Angular distance in equatorial plane
95 (default) | scalar value between 0
and 360
| 1D array of size numSat
Right ascension of ascending node (RAAN), specified as a scalar value between
0
and 360
or 1D array of size
numSat, in specified units. numSat is the
number of spacecraft. RAAN is the angular distance along the reference plane from the
ICRF x-axis to the location of the ascending node (the point at
which the spacecraft crosses the reference plane from south to north).
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit type to
Keplerian
orCircular inclined
.
Programmatic Use
Block Parameter:
raan |
Type: character vector |
Values:
95 | scalar value between 0 and
360 | 1D array of size m number of
spacecraft |
Default:
'95' |
Argument of periapsis (deg) — Angle from spacecraft ascending node to periapsis
93 (default) | degrees between 0
and 360
| radians between 0
and 2*pi
| 1D array of size m, number of spacecraft
Angle from the spacecraft ascending node to periapsis (closest point of orbit to the central body), specified as a 1D array of size m that is number of spacecraft, in specified units.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
Orbit type to
Keplerian
Programmatic Use
Block Parameter:
argPeriapsis |
Type: character vector |
Values:
'95' | scalar value between 0 and
360 | 1D array of size numSat |
Default:
'93' |
True anomaly — Angle between periapsis and initial position of spacecraft
203 (default) | scalar | degrees between 0
and 360
| radians between 0
and 2*pi
| 1D array of size numSat
Angle between periapsis (closest point of orbit to the central body) and the initial position of spacecraft along its orbit at Start date/time, specified as a scalar or 1D array of size numSat, in specified units. numSat is the number of spacecraft.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit type to
Keplerian
orElliptical inclined
.
Programmatic Use
Block Parameter:
trueAnomaly |
Type: character vector |
Values:
'203' | scalar | degrees between 0 and
360 | radians between 0 and
2*pi | 1D array of size numSat |
Default:
'203' |
Argument of latitude (deg) — Angle between ascending node and initial position of spacecraft
200 (default) | scalar | degrees between 0
and 360
| radians between 0
and 2*pi
| 1D array of size numSat
Angle between the ascending node and the initial position of spacecraft along its orbit at Start date/time, specified as a scalar or 3-element vector or 1D array of size number of spacecraft, in specified units.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit Type to
Circular inclined
.
Programmatic Use
Block Parameter:
argLat |
Type: character vector |
Values:
'200' | scalar | degrees between 0 and
360 | radians between 0 and
2*pi | 1D array of size numSat |
Default:
'200' |
Longitude of periapsis (deg) — Angle between ICRF x-axis and eccentricity vector
100 (default) | scalar | degrees between 0
and 360
| radians between 0
and 2*pi
| 1D array of size numSat
Angle between the ICRF x-axis and the eccentricity vector, specified as a scalar or 3-element vector or 1D array of size number of spacecraft, in specified units.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit type to
Elliptical equatorial
.
Programmatic Use
Block Parameter:
lonPeriapsis |
Type: character vector |
Values: 100 | scalar | degrees between
0 and 360 | radians between
0 and 2*pi | 1D array of size
m, number of spacecraft |
Default:
'100' |
True longitude (deg) — Angle between ICRF x-axis and initial position of spacecraft
150 (default) | scalar | degrees between 0
and 360
| radians between 0
and 2*pi
| 1D array of size numSat
Angle between the ICRF x-axis and the initial position of spacecraft along its orbit at Start date/time, specified as a scalar or 1D array of size numSat, in specified units. numSat is the number of spacecraft.
Dependencies
To enable this parameter, set:
Initial state format to
Orbital elements
.Orbit type to
Circular equatorial
.
Programmatic Use
Block Parameter:
trueLon |
Type: character vector |
Values:
'150' | scalar | degrees between 0 and
360 | radians between 0 and
2*pi | 1D array of size numSat |
Default:
'150' |
ICRF position — Cartesian position vector of spacecraft
[3649700.0 3308200.0 -4676600.0]
(default) | 3-element vector | | numSat-by-3 array
Cartesian position vector of spacecraft in ICRF coordinate system at Start date/time, specified as a 3-element vector for single spacecraft or numSat-by-3 array for multiple spacecraft. numSat is the number of spacecraft.
Dependencies
To enable this parameter, set Initial state format to
ICRF state vector
.
Programmatic Use
Block Parameter:
inertialPosition |
Type: character vector |
Values:
[3649700.0 3308200.0 -4676600.0] | 3-element vector for single
spacecraft or 2-D array of size m-by-3 array of multiple
spacecraft |
Default:
'[3649700.0 3308200.0 -4676600.0]' |
ICRF velocity — Cartesian velocity vector of spacecraft
[-2750.8 6666.4 2573.4]
(default) | 3-element vector for single spacecraft or 2-D array of size
m-by-3 array of multiple spacecraft
Cartesian velocity vector of spacecraft in ICRF coordinate system at Start date/time, specified as a 3-element vector for single spacecraft or 2-D array of size m-by-3 array of multiple spacecraft.
Dependencies
To enable this parameter, set Initial state format to
ICRF state vector
.
Programmatic Use
Block Parameter:
inertialVelocity |
Type: character vector |
Values:
[-2750.8 6666.4 2573.4] | 3-element vector for single
spacecraft or 2-D array of size m-by-3 array of multiple
spacecraft |
Default:
'[-2750.8 6666.4 2573.4]' |
Fixed-frame position — Position vector of spacecraft
[-4142689.0 -2676864.7 -4669861.6] (default) | 3-element vector for single spacecraft or 2-D array of size
m-by-3 array of multiple spacecraft
Cartesian position vector of spacecraft in fixed-frame coordinate system at Start date/time, specified as a 3-element vector for single spacecraft or 2-D array of size m-by-3 array of multiple spacecraft.
Dependencies
To enable this parameter, set:
Propagation method to
Numerical (high precision)
.set Initial state format to
Fixed-frame state vector
.
Programmatic Use
Block Parameter:
fixedPosition |
Type: character vector |
Values:
'[-4142689.0 -2676864.7 -4669861.6]' | 3-element vector for
single spacecraft or 2-D array of size m-by-3 array of multiple
spacecraft |
Default:
'[-2750.8 6666.4 2573.4]' |
Fixed-frame velocity — Velocity vector of spacecraft
[1452.7 -6720.7 2568.1] (default) | 3-element vector for single spacecraft or 2-D array of size
m-by-3 array of multiple spacecraft
Cartesian velocity vector of spacecraft in fixed-frame coordinate system at Start date/time, specified as a 3-element vector for single spacecraft or 2-D array of size m-by-3 array of multiple spacecraft.
Dependencies
To enable this parameter, set:
Propagation method to
Numerical (high precision)
.Initial state format to
Fixed-frame state vector
.
Programmatic Use
Block Parameter:
fixedVelocity |
Type: character vector |
Values:
'[1452.7 -6720.7 2568.1]' | 3-element vector for single
spacecraft or 2-D array of size m-by-3 array of multiple
spacecraft |
Default:
'[1452.7 -6720.7 2568.1]' |
Central Body
Configure the central body environment around which the spacecraft orbits.
Central body — Celestial body around which spacecraft orbits
Earth
(default) | Moon
| Mercury
| Venus
| Mars
| Jupiter
| Saturn
| Uranus
| Neptune
| Sun
| Custom
Celestial body, specified as Earth
,
Moon
, Mercury
,
Venus
, Mars
,
Jupiter
, Saturn
,
Uranus
, Neptune
,
Sun
, or Custom
, around which
the spacecraft defined in the Orbit tab orbits.
Programmatic Use
Block Parameter: centralBody |
Type: character vector |
Values:
'Earth' | 'Moon'
|'Mercury' | 'Venus' |
'Mars' | 'Jupiter' |
'Saturn' | 'Uranus' |
'Neptune' | 'Sun' |
'Custom' | |
Default: 'Earth' |
Units
Units — Parameter and port units
Metric (m/s)
(default) | Metric (km/s)
| Metric (km/h)
| English (ft/s)
| English (kts)
Parameter and port units, specified as:
Units | Distance | Velocity | Acceleration | Mass | Area | Density |
---|---|---|---|---|---|---|
Metric (m/s) | meters | meters/sec | meters/sec2 | Kilograms | m2 | kg/m3, some density outputs 1/m3 |
Metric (km/s) | kilometers | kilometers/sec | kilometers/sec2 | Kilograms | m2 | kg/m3, some density outputs 1/m3 |
Metric (km/h) | kilometers | kilometers/hour | kilometers/hour2 | Kilograms | m2 | kg/m3, some density outputs 1/m3 |
English (ft/s) | feet | feet/sec | feet/sec2 | Slugs | feet2 | lbm/ft3, some density outputs 1/ft3 |
English (kts) | nautical mile | knots | knots/sec | Slugs | feet2 | lbm/ft3, some density outputs 1/ft3 |
Programmatic Use
Block Parameter:
units |
Type: character vector |
Values:
'Metric (m/s)' | 'Metric (km/s)' |
'Metric (km/h)' | 'English (ft/s)' |
'English (kts)' |
Default:
'Metric (m/s)' |
Angle units — Angle units
Degrees
(default) | Radians
Parameter and port units for angles, specified as
Degrees
or Radians
.
Programmatic Use
Block Parameter:
angleUnits |
Type: character vector |
Values:
'Degrees' | 'Radians' |
Default:
'Degrees' |
Time format — Time format for start date and time output
Julian date
(default) | Gregorian
Time format for Start date/time (UTC Julian date) and output
port tutc, specified as
Julian date
or Gregorian
.
Programmatic Use
Block Parameter:
timeFormat |
Type: character vector |
Values:
'Julian date' | 'Gregorian' |
Default:
'Julian date' |
Alternative Configurations
Orbit Propagator Numerical (high precision) — Propagate orbit of one or more spacecraft using high precision variable formulation
The Orbit Propagator
Numerical (high precision) block propagates the orbit of one or more
spacecraft by a numerical (high precision) propagation method. To enable this block, set
Propagation method to Numerical (high
precision)
.
Libraries:
Aerospace Blockset /
Spacecraft /
Spacecraft Dynamics
Algorithms
Coordinate Systems
The Orbit Propagator Kepler (unperturbed) block works in the ICRF and fixed-frame coordinate systems:
ICRF — International Celestial Reference Frame (ICRF). This frame can be treated as equal to the ECI coordinate system realized at J2000 (Jan 1 2000 12:00:00 TT. For more information, see ECI Coordinates).
To describe a point in space, you need a frame of reference that does not rotate with respect to the stars. The ICRF, with the origin at the center of the Earth and orthogonal vectors I, J, and K, is used as the frame of reference. The fundamental plane is the IJ-plane, which is closely aligned with the equator with a small offset that changes over time because of precession and nutation of the rotation axis of the Earth.
Fixed-frame — Fixed-frame is a generic term for the coordinate system that is fixed to the central body (its axes rotate with the central body and are not fixed in inertial space). For high precision orbit propagation methods
When the central body is earth, and the Earth orientation parameters (EOPs) are used, the Fixed-frame for Earth is the International Terrestrial Reference Frame (ITRF). This reference frame is realized by the IAU2000/2006 reduction from the ICRF coordinate system using the earth orientation parameter file provided. If Earth orientation parameters are not used, the block still uses the IAU2000/2006 reduction, but with Earth orientation parameters set to
0
.When the central body is moon, and the moon libration angles are provided as input, the fixed-frame coordinate system for the moon is the Mean Earth/pole axis frame (ME). This frame is realized by two transformations. First, the values in the ICRF frame are transformed into the Principal Axis system (PA), the axis defined by the libration angles provided as inputs to the block. For more information, see Moon Libration. The states are then transformed into the ME system using a fixed rotation from the "Report of the IAU/IAG Working Group on cartographic coordinates and rotational elements: 2006" [5]. If the Moon libration angles input is not provided, the fixed frame is defined by the directions of the poles of rotation and prime meridians defined in the "Report of the IAU/IAG Working Group on cartographic coordinates and rotational elements: 2006" [5].
When the Central Body is custom, the fixed-frame coordinate system is defined by the poles of rotation and prime meridian defined by the block input α, δ, W, or the spin axis properties.
In all other cases, the fixed frame for each central body is defined by the directions of the poles of rotation and prime meridians defined in the "Report of the IAU/IAG Working Group on cartographic coordinates and rotational elements: 2006" [5].
Orbit Propagation Methods
The Aerospace Blockset™ supports two top-level orbit propagation methods:
Kepler (unperturbed)
and Numerical (high
precision)
.
For more information, see Orbit Propagation Methods.
References
[1] Vallado, David. Fundamentals of Astrodynamics and Applications, 4th ed. Hawthorne, CA: Microcosm Press, 2013.
[2] Gottlieb, R. G., "Fast Gravity, Gravity Partials, Normalized Gravity, Gravity Gradient Torque and Magnetic Field: Derivation, Code and Data," Technical Report NASA Contractor Report 188243, NASA Lyndon B. Johnson Space Center, Houston, Texas, February 1993.
[3] Konopliv, A. S., S. W. Asmar, E. Carranza, W. L. Sjogen, D. N. Yuan., "Recent Gravity Models as a Result of the Lunar Prospector Mission, Icarus", Vol. 150, no. 1, pp 1–18, 2001.
[4] Lemoine, F. G., D. E. Smith, D.D. Rowlands, M.T. Zuber, G. A. Neumann, and D. S. Chinn, "An improved solution of the gravity field of Mars (GMM-2B) from Mars Global Surveyor", Journal Of Geophysical Research, Vol. 106, No. E10, pp 23359-23376, October 25, 2001.
[5] Seidelmann, P.K., Archinal, B.A., A’hearn, M.F. et al. "Report of the IAU/IAG Working Group on cartographic coordinates and rotational elements: 2006." Celestial Mech Dyn Astr 98, 155–180 (2007).
[6] Montenbruck, Oliver, and Gill Eberhard. Satellite Orbits: Models, Methods, and Applications. Springer, 2000.
Extended Capabilities
C/C++ Code Generation
Generate C and C++ code using Simulink® Coder™.
Version History
Introduced in R2020bR2023b: Orbit Propagator Block Changes
The Orbit Propagator block has been updated to take into account:
The effects of third body gravity on orbit propagation.
Space weather data from a data file generated by the
aeroReadSpaceWeatherData
function.Solar radiation pressure (SRP).
Comando de MATLAB
Ha hecho clic en un enlace que corresponde a este comando de MATLAB:
Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)