Vehicle

Virtual Vehicle Composer, vehicle motion, and driving scenarios

The Powertrain Blockset™ includes blocks for 1DOF and 3DOF vehicle motion. The driving scenario blocks allow you to specify a drive cycle and driver commands. Use the vehicle blocks in fuel economy studies and drive cycle analysis.

Use the Virtual Vehicle Composer app to configure and build a virtual vehicle that you can use for system-level performance analysis, including component sizing, fuel economy, and drive cycle tracking. To get started with your virtual vehicle, see Get Started with the Virtual Vehicle Composer.

Apps

Virtual Vehicle Composer

Configure, build, and analyze a virtual automotive vehicle

Blocks

expand all

Vehicle Motion

Vehicle Body 1DOF Longitudinal	Two-axle vehicle in forward and reverse motion
Vehicle Body 3DOF Longitudinal	3DOF rigid vehicle body to calculate longitudinal, vertical, and pitch motion
Vehicle Body Total Road Load	Vehicle motion using coast-down testing coefficients
Motorcycle Chain	Implement motorcycle chain
Motorcycle Body Longitudinal In-Plane	Longitudinal in-plane motorcycle vehicle motion

Driving Scenarios

Drive Cycle Source	Standard or specified longitudinal drive cycle
Longitudinal Driver	Longitudinal speed-tracking controller

Functions

expand all

MDF File

`mdf`	Access information contained in MDF-file
`mdfVisualize`	View channel data from MDF-file
`channelList`	Information on available MDF groups and channels
`read`	Read channel data from MDF-file
`saveAttachment`	Save attachment from MDF-file

MDF Datastore

`mdfDatastore`	Datastore for collection of MDF-files
`read`	Read data in MDF datastore
`readall`	Read all data in MDF datastore
`preview`	Subset of data from MDF datastore
`reset`	Reset MDF datastore to initial state
`hasdata`	Determine if data is available to read from MDF datastore
`partition`	Partition MDF datastore
`numpartitions`	Number of partitions for MDF datastore

Topics

Get Started with the Virtual Vehicle Composer

Use the Virtual Vehicle Composer app to configure, build, and analyze a virtual vehicle.
- STEP 1: Configure Virtual Vehicle Data
- STEP 2: Configure Virtual Vehicle Scenario and Test
- STEP 3: Configure Virtual Vehicle Data Logging
- STEP 4: Build Virtual Vehicle
- STEP 5: Operate Virtual Vehicle
- STEP 6: Analyze Virtual Vehicle
Install Drive Cycle Data
Install drive cycle data for the Drive Cycle Source block from a support package.
Track Drive Cycle Errors
Use the Drive Cycle Source blocks to identify drive cycle faults.

Featured Examples

Conventional Vehicle Reference Application

Simulate a full vehicle model with an internal combustion engine, transmission, and associated powertrain control algorithms. Use for powertrain matching analysis and component selection, control and diagnostic algorithm design, and hardware-in-the-loop (HIL) testing.

Open Example