Ajuste, análisis y validación
R2026bAjuste los parámetros del sistema de control y analice los resultados en Control System Tuner
Una vez que el modelo está configurado para el ajuste, Control System Tuner ajusta los coeficientes ajustables para cumplir los requisitos de diseño. En un informe de ajuste se resume el grado en que el diseño ajustado satisface los requisitos.
Para validar el resultado, examine las respuestas del sistema y evalúe la precisión con la que se cumplen los objetivos de ajuste. En caso de un sistema de control modelado en Simulink®, registre los valores de los parámetros ajustados en el modelo para la validación con respecto a todo el sistema no lineal.
Temas
Requisitos estrictos y flexibles
- Manage Tuning Goals
Designate tuning goals as soft requirements or hard constraints.
Análisis y validación
- Interpret Numeric Tuning Results
Tuning reports fromsystuneand Control System Tuner give you an overview of how well the tuned control system meets your tuning goals. - Visualize Tuning Goals
Tuning-goal plots let you visualize your design requirements against tuned system responses, to see where and by how much tuning goals are satisfied or violated. - Validate Tuned Control System
When you tune a control system, validate the results by examining system responses with the tuned parameters. - Create Response Plots in Control System Tuner
Control System Tuner can generate many types of response plots in the time and frequency domains. View responses of SISO or MIMO transfer functions between inputs and outputs at any location in your model. - Examine Tuned Controller Parameters in Control System Tuner
Use the Data Browser or the Tuned Block Editor to examine the parameters of tuned controllers in Control System Tuner. - Compare Performance of Multiple Tuned Controllers
Control System Tuner lets you compare the performance of a control system tuned with two different sets of tuning goals. - Generate MATLAB Code from Control System Tuner for Command-Line Tuning
Generated scripts are useful when you want to programmatically reproduce a result you obtained interactively using Control System Tuner.
