Q = getQualityFactor(npFilter)
returns the quality factor (Q factor) of the notch peak filter. The Q factor is defined as
the center frequency divided by the bandwidth.
Create a dsp.NotchPeakFilter object in the default configuration, where the Specification property is set to 'Bandwidth and center frequency'.
np = dsp.NotchPeakFilter
np =
dsp.NotchPeakFilter with properties:
Specification: 'Bandwidth and center frequency'
Bandwidth: 2205
CenterFrequency: 11025
NormalizedFrequency: false
SampleRate: 44100
Determine the quality factor of the filter using the getQualityFactor function. The quality factor is given by the ratio of the center frequency to the bandwidth.
getQualityFactor(np)
ans = 5
Visualize the filter response using filterAnalyzer.
In the dsp.NotchPeakFilter object, you can now specify
the 3-dB bandwidth and center frequency values in normalized frequency units (0 to 1). To
enable this functionality, set the NormalizedFrequency property of the object to true.
You clicked a link that corresponds to this MATLAB command:
Run the command by entering it in the MATLAB Command Window.
Web browsers do not support MATLAB commands.
Seleccione un país/idioma
Seleccione un país/idioma para obtener contenido traducido, si está disponible, y ver eventos y ofertas de productos y servicios locales. Según su ubicación geográfica, recomendamos que seleccione: .
También puede seleccionar uno de estos países/idiomas:
Cómo obtener el mejor rendimiento
Seleccione China (en idioma chino o inglés) para obtener el mejor rendimiento. Los sitios web de otros países no están optimizados para ser accedidos desde su ubicación geográfica.