Initialize test bench inputs

Specify initial value driven on test bench inputs before data is asserted to DUT

Model Configuration Pane: Test Bench

Description

Specify initial value driven on test bench inputs before data is asserted to DUT.

This option is disabled if you select the entire model. Select the DUT instead for Generate HDL for setting.

Off (default) | On

To set this property, use hdlset_param or makehdltb. To view the property value, use hdlget_param.

For example, you can specify this parameter for the symmetric_fir subsystem inside the sfir_fixed model using either of these methods.

Pass the property as an argument to the makehdltb function.

makehdltb('sfir_fixed/symmetric_fir', ... 
            'InitializeTestBenchInputs', 'on')

When you use hdlset_param, you can set the parameter on the model and then generate HDL code using makehdltb.
```
hdlset_param('sfir_fixed', 'InitializeTestBenchInputs', 'on')
makehdltb('sfir_fixed/symmetric_fir')
```

No recommendations.

Parameter: InitializeTestBenchInputs

Type: character vector

Value: 'on' | 'off'

Default: 'off'

Introduced in R2012a