Main Content

noisefigure

Calculate noise figure of transmission lines, series RLC, and shunt RLC circuits

Since R2020b

collapse all in page

Syntax

nf = noisefigure(transmissionline,frequency,zs)
nf = noisefigure(RLCckt,frequency,zs)

Description

nf = noisefigure(transmissionline,frequency,zs) calculate the noise figure of transmission lines using the given frequency and source impedance.

example

nf = noisefigure(RLCckt,frequency,zs) calculate the noise figure of series and shunt RLC circuits using the given frequency and source impedance. RLCckt is either seriesRLC or shuntRLC objects.

example

Examples

collapse all

Open Live Script

Create a two-wire transmission line using these specifications:

  • Radius - 0.5 mm

  • Dielectric - air

  • Thickness of dielectric or separation - 1.088 mm

  • Permittivity or EpsilonR - 1.0054

twowiretxline = txlineTwoWire('Radius',0.5e-3,'EpsilonR',1.0054,'Separation',1.088e-3);

Calculate the noise figure and the group delay of the transmission line at 2.5 GHz.

nf = noisefigure(twowiretxline,2.5e9)
nf = 
0

gd = groupdelay(twowiretxline,2.5e9)
gd = 
3.3446e-11

Input Arguments

collapse all

Series or shunt RLC circuit objects, specified as a seriesRLC or shuntRLC objects.

Frequency to calculate noise figure, specified as a positive scalar in hertz.

Source impedance, specified as a positive real scalar in ohms.

Version History

Introduced in R2020b

expand all

See Also

| |