(Not recommended) Modal form realization and projection
[G1,G2] = modreal(G,cut)
[G1,G2] = modreal(G,cut) returns a set of
state-space LTI objects
G2 in modal form
given a state-space
G and the model size of
The modal form realization has its A matrix in block diagonal form with either 1x1 or 2x2 blocks. The real eigenvalues will be put in 1x1 blocks and complex eigenvalues will be put in 2x2 blocks. These diagonal blocks are ordered in ascending order based on eigenvalue magnitudes.
The complex eigenvalue a+bj is appearing as 2x2 block
This table describes input arguments for
LTI model to be reduced.
(Optional) an integer to split the realization. Without it, a complete modal form realization is returned
This table lists output arguments.
LTI models in modal form
G can be stable or unstable.
G2 = (A2,
D1 = D +
is calculated such that the system DC gain is preserved.
Given a continuous stable or unstable system,
G, the following
commands can get a set of modal form realizations depending on the split index --
rng(1234,'twister'); G = rss(50,2,2); [G1,G2] = modreal(G,2); % cut = 2 for two rigid body modes G1.D = zeros(2,2); % remove the DC gain of the system from G1 sigma(G,G1,G2)
Using a real eigen structure decomposition
reig and ordering the
eigenvectors in ascending order according to their eigenvalue magnitudes, we can form a
similarity transformation out of these ordered real eigenvectors such that he resulting
G2 are in block diagonal modal
This routine is extremely useful when model has jω-axis
singularities, e.g., rigid body dynamics. It has been incorporated inside Hankel
based model reduction routines -
schurmr to isolate those jω-axis poles
from the actual model reduction process.