uavSensor
Description
The uavSensor
object creates a sensor that is rigidly attached to
a UAV platform, specified as a uavPlatform
object.
You can specify different mounting positions and orientations. Configure this object to
automatically generate readings from a sensor specified as one of these System
objects.
gnssMeasurementGenerator
(Navigation Toolbox)
Alternatively, you can specify the sensor as a derived class from the uav.SensorAdaptor
base
class.
Creation
Description
creates a sensor with the specified name sensor
= uavSensor(name
,platform
,sensormodel
)name
and sensor model
sensormodel
, which set the Name
and
SensorModel
properties respectively. The sensor is added to the
platform platform
specified as a uavPlatform
object.
sets properties using one or more
name-value arguments in addition to the input arguments in the previous syntax. You can
specify the sensor
= uavSensor(___,Name=Value
)MountingLocation
, MountingAngles
,
or UpdateRate
properties as name-value pairs. For example,
uavSensor("uavLidar",plat,lidarmodel,MountingLocation=[1 0 0])"
places the sensor one meter forward in the x-direction relative to
the platform body frame.
Properties
Name
— Sensor name
string scalar
Sensor name, specified as a string scalar. Choose a name to identify this specific sensor.
Example:
"uavLidar"
Data Types: string
| char
MountingLocation
— Sensor position on platform
vector of the form [x y z]
Sensor position on platform, specified as a vector of the form [x y
z]
in the platform frame. Units are in meters.
Example:
[1 0 0]
is 1 m in the x-direction.
Data Types: double
MountingAngles
— Sensor orientation rotation angles
vector of the form [z y x]
Sensor orientation rotation angles, specified as a vector of the form [z y
x]
where z
, y
, x
are rotations about the z-axis, y-axis, and
x-axis, sequentially, in degrees. The orientation is relative to
the platform body frame.
Example:
[30 90 0]
Data Types: double
UpdateRate
— Update rate of sensor
positive scalar
Update rate of the sensor, specified as a positive scalar in hertz. By default, the
object uses the UpdateRate
property of the specified sensor model
object.
The sensor update interval (1/UpdateRate
) must be a multiple of
the update interval for the associated uavScenario
object.
Data Types: double
SensorModel
— Sensor model for generating readings
insSensor
System object™ | gpsSensor
System object | uavLidarPointCloudGenerator
System object | gnssMeasurementGenerator
System object
Sensor model for generating readings, specified as one of these System objects.
gnssMeasurementGenerator
(Navigation Toolbox)
Object Functions
read | Gather latest reading from UAV sensor |
Examples
UAV Scenario Tutorial
Create a scenario to simulate unmanned aerial vehicle (UAV) flights between a set of buildings. The example demonstrates updating the UAV pose in open-loop simulations. Use the UAV scenario to visualize the UAV flight and generate simulated point cloud sensor readings.
Introduction
To test autonomous algorithms, a UAV scenario enables you to generate test cases and generate sensor data from the environment. You can specify obstacles in the workspace, provide trajectories of UAVs in global coordinates, and convert data between coordinate frames. The UAV scenario enables you to visualize this information in the reference frame of the environment.
Create Scenario with Polygon Building Meshes
A uavScenario
object is a model consisting of a set of static obstacles and movable objects called platforms. Use uavPlatform
objects to model fixed-wing UAVs, multirotors, and other objects within the scenario. This example builds a scenario consisting of a ground plane and 11 buildings as by extruded polygons. The polygon data for the buildings is loaded and used to add polygon meshes.
% Create the UAV scenario. scene = uavScenario(UpdateRate=2,ReferenceLocation=[75 -46 0]); % Add a ground plane. color.Gray = 0.651*ones(1,3); color.Green = [0.3922 0.8314 0.0745]; color.Red = [1 0 0]; addMesh(scene,"polygon",{[-250 -150; 200 -150; 200 180; -250 180],[-4 0]},color.Gray) % Load building polygons. load("buildingData.mat"); % Add sets of polygons as extruded meshes with varying heights from 10-30. addMesh(scene,"polygon",{buildingData{1}(1:4,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{2}(2:5,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{3}(2:10,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{4}(2:9,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{5}(1:end-1,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{6}(1:end-1,:),[0 15]},color.Green) addMesh(scene,"polygon",{buildingData{7}(1:end-1,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{8}(2:end-1,:),[0 10]},color.Green) addMesh(scene,"polygon",{buildingData{9}(1:end-1,:),[0 15]},color.Green) addMesh(scene,"polygon",{buildingData{10}(1:end-1,:),[0 30]},color.Green) addMesh(scene,"polygon",{buildingData{11}(1:end-2,:),[0 30]},color.Green) % Show the scenario. show3D(scene); xlim([-250 200]) ylim([-150 180]) zlim([0 50])
Define UAV Platform and Mount Sensor
You can define a uavPlatform
in the scenario as a carrier of your sensor models and drive them through the scenario to collect simulated sensor data. You can associate the platform with various meshes, such as fixedwing
, quadrotor
, and cuboid
meshes. You can define a custom mesh defined ones represented by vertices and faces. Specify the reference frame for describing the motion of your platform.
Load flight data into the workspace and create a quadrotor platform using an NED reference frame. Specify the initial position and orientation based on loaded flight log data. The configuration of the UAV body frame orients the x-axis as forward-positive, the y-axis as right-positive, and the z-axis downward-positive.
load("flightData.mat") % Set up platform plat = uavPlatform("UAV",scene,ReferenceFrame="NED", ... InitialPosition=position(:,:,1),InitialOrientation=eul2quat(orientation(:,:,1))); % Set up platform mesh. Add a rotation to orient the mesh to the UAV body frame. updateMesh(plat,"quadrotor",{10},color.Red,[0 0 0],eul2quat([0 0 pi]))
You can choose to mount different sensors, such as the insSensor
, gpsSensor
, gnssMeasurementGenerator
, or uavLidarPointCloudGenerator
System objects to your UAV. Mount a lidar point cloud generator and a uavSensor
object that contains the lidar sensor model. Specify a mounting location of the sensor that is relative to the UAV body frame.
lidarmodel = uavLidarPointCloudGenerator(AzimuthResolution=0.3324099,... ElevationLimits=[-20 20],ElevationResolution=1.25,... MaxRange=90,UpdateRate=2,HasOrganizedOutput=true); lidar = uavSensor("Lidar",plat,lidarmodel,MountingLocation=[0,0,-1]);
Fly the UAV Platform Along Pre-Defined Trajectory and Collect Point Cloud Sensor Readings
Move the UAV along a pre-defined trajectory, and collect the lidar sensor readings along the way. This data could be used to test lidar-based mapping and localization algorithms.
Preallocate the traj
and scatterPlot
line plots and then specify the plot-specific data sources. During the simulation of the uavScenario
, use the provided plotFrames
output from the scene as the parent axes to visualize your sensor data in the correct coordinate frames.
Visualize the scene.
[ax,plotFrames] = show3D(scene);
Update plot view for better visibility.
xlim([-250 200]) ylim([-150 180]) zlim([0 50]) view([-110 30]) axis equal hold on
Create a line plot for the trajectory. First create the plot with plot3
, then manually modify the data source properties of the plot. This improves performance of the plotting.
traj = plot3(nan,nan,nan,Color=[1 1 1],LineWidth=2); traj.XDataSource = "position(:,2,1:idx+1)"; traj.YDataSource = "position(:,1,1:idx+1)"; traj.ZDataSource = "-position(:,3,1:idx+1)";
Create a scatter plot for the point cloud. Update the data source properties again.
colormap("jet") pt = pointCloud(nan(1,1,3)); scatterplot = scatter3(nan,nan,nan,1,[0.3020 0.7451 0.9333],... Parent=plotFrames.UAV.Lidar); scatterplot.XDataSource = "reshape(pt.Location(:,:,1),[],1)"; scatterplot.YDataSource = "reshape(pt.Location(:,:,2),[],1)"; scatterplot.ZDataSource = "reshape(pt.Location(:,:,3),[],1)"; scatterplot.CDataSource = "reshape(pt.Location(:,:,3),[],1) - min(reshape(pt.Location(:,:,3),[],1))";
Set up the simulation. Then, iterate through the positions and show the scene each time the lidar sensor updates. Advance the scene, move the UAV platform, and update the sensors.
setup(scene) for idx = 0:size(position, 3)-1 [isupdated,lidarSampleTime, pt] = read(lidar); if isupdated % Use fast update to move platform visualization frames. show3D(scene,"Time",lidarSampleTime,FastUpdate=true,Parent=ax); % Refresh all plot data and visualize. refreshdata drawnow limitrate end % Advance scene simulation time and move platform. advance(scene); move(plat,[position(:,:,idx+1),zeros(1,6),eul2quat(orientation(:,:,idx+1)),zeros(1,3)]) % Update all sensors in the scene. updateSensors(scene) end hold off
Generate GNSS Measurements in UAV Scenario
Create variables for the GNSS sample rate and the geodetic reference location. Set the sample rate to 10 Hz, and set the reference location to Natick, Massachusetts.
Fs = 10; refLocNatick = [42.2825 -71.343 53.0352];
Create a UAV scenario using the specified reference location set to Natick, and set the update rate to match the GNSS sample rate.
scene = uavScenario(ReferenceLocation=refLocNatick,UpdateRate=Fs);
Create a UAV platform using the default NED reference frame.
plat = uavPlatform("UAV",scene,InitialPosition=[0 0 -30]);
Create a gnssMeasurementGenerator
object with the previously specified GNSS sample rate and reference location.
gnssSensor = gnssMeasurementGenerator(ReferenceLocation=refLocNatick, ...
SampleRate=Fs);
Attach a GNSS sensor to the UAV platform using the uavSensor
object, and specify gnssSensor
as the sensor model.
gnss = uavSensor("GNSS",plat,gnssSensor,MountingLocation=[0 0 -0.5]);
Set up the scenario, and get the initial pseudoranges, satellite positions, and satellite status measurements.
setup(scene) [~,~,pr,satPos,status] = gnss.read
pr = 8×1
107 ×
2.4347
2.4105
2.0379
2.0688
2.4557
2.2116
2.3072
2.2654
satPos = 8×3
107 ×
-1.5430 -0.1777 2.1544
0.2454 -2.5209 -0.7993
1.0231 -2.0099 1.4027
-0.2201 -1.6590 2.0624
1.5236 0.8342 2.0092
1.4978 -0.2896 2.1741
-0.4057 -2.6227 -0.1050
2.3032 -0.8825 0.9852
status = struct with fields:
LOS: [8x1 logical]
Advance the scene simulation time. The simulation advances a single step based on the specified update rate of 10 Hz, to 0.1 seconds.
advance(scene);
Update the sensors and get the pseudoranges, satellite positions, and satellite status measurements at the new timestep.
updateSensors(scene) [isUpdated,timestamp,pr,satPos,status] = gnss.read
isUpdated = logical
1
timestamp = 0.1000
pr = 8×1
107 ×
2.4347
2.4105
2.0379
2.0688
2.4557
2.2116
2.3072
2.2654
satPos = 8×3
107 ×
-1.5430 -0.1777 2.1544
0.2454 -2.5209 -0.7993
1.0231 -2.0099 1.4027
-0.2201 -1.6590 2.0624
1.5236 0.8342 2.0092
1.4978 -0.2896 2.1741
-0.4057 -2.6227 -0.1050
2.3032 -0.8825 0.9852
status = struct with fields:
LOS: [8x1 logical]
Use the pseudoranges and satellite positions to estimate the UAV position. This result shows that the UAV is hovering 30 meters above the reference location.
recPos = receiverposition(pr(status.LOS,:),satPos(status.LOS,:))
recPos = 1×3
42.2825 -71.3433 83.6139
Version History
Introduced in R2020bR2023b: Support for GNSS sensor model
The uavSensor
object now accepts the
gnssMeasurementGenerator
System object as a sensor model for generating readings.
See Also
Functions
Objects
uavScenario
|uavPlatform
|insSensor
|gpsSensor
|uavLidarPointCloudGenerator
|uav.SensorAdaptor
|gnssMeasurementGenerator
(Navigation Toolbox)
Topics
Comando de MATLAB
Ha hecho clic en un enlace que corresponde a este comando de MATLAB:
Ejecute el comando introduciéndolo en la ventana de comandos de MATLAB. Los navegadores web no admiten comandos de MATLAB.
Select a Web Site
Choose a web site to get translated content where available and see local events and offers. Based on your location, we recommend that you select: .
You can also select a web site from the following list:
How to Get Best Site Performance
Select the China site (in Chinese or English) for best site performance. Other MathWorks country sites are not optimized for visits from your location.
Americas
- América Latina (Español)
- Canada (English)
- United States (English)
Europe
- Belgium (English)
- Denmark (English)
- Deutschland (Deutsch)
- España (Español)
- Finland (English)
- France (Français)
- Ireland (English)
- Italia (Italiano)
- Luxembourg (English)
- Netherlands (English)
- Norway (English)
- Österreich (Deutsch)
- Portugal (English)
- Sweden (English)
- Switzerland
- United Kingdom (English)