Formación en MATLAB y Simulink

Detalles del curso

Este curso práctico de un día se centra en modelizar diseños Radio Definida por Software en MATLAB® y Simulink® y configurarlos y desplegarlos sobre PicoZed SDR.

Temas incluidos:

  • Modelización de un sistema de comunicaciones utilizando Simulink
  • Implementación de Radio I/O con PicoZed y Simulink
  • Prototipado del despliegue con datos en tiempo real vía codiseño HW/SW

Día 1 de 1


Model Communications System using Simulink

Objectivo: Model and simulate RF signal chain and communications algorithms.

  • Overview of software-defined radio concepts and workflows
  • Model and understand AD9361 RF Agile Transceiver using Simulink
  • Simulate a communications system that includes a transmitter, AD9361 Transceiver, channel and Receiver (RF test environment)

Implement Radio I/O with ADI RF SOM and Simulink

Objectivo: Verify the operation of baseband transceiver algorithm using real data streamed from the AD9361 into MATLAB and Simulink.

  • Overview of System object and hardware platform
  • Set up ADI RF SOM as RF front-end for over-the-air signal capture or transmission
  • Perform baseband processing in MATLAB and Simulink on captured receive signal
  • Configure AD9361 registers and filters via System object
  • Verify algorithm performance for real data versus simulated data

Prototype Deployment with Real-Time Data via HW/SW Co-Design

Objectivo: Generate HDL and C code targeting the programmable logic (PL) and processing system (PS) on the Zynq SoC to implement TX/RX.

  • Overview of Zynq HW/SW co-design workflow
  • Implement Transmitter and Receiver on PL/PS using HW/SW co-design workflow
  • Configure software interface model
  • Download generated code to the ARM processor and tune system parameters in real-time operation via Simulink
  • Deploy a stand-alone system

Nivel: Avanzado

Prerrequisitos:

Duración: 1 día

Vea los horarios e inscríbase