How can I have a Bus Selector block accept signal from an Inport block in a subsystem in Simulink?

I am trying to create a subsystem that accepts a bus signal from an Inport block and feeds it to a Bus Selector block. The final objective is to generate an S-function from the subsystem. However, when I attempt to run the model with the subsystem configured as mentioned above, I get the following error message:

 'untitled/Subsystem/Bus Selector' must be connected to a Bus Creator, Bus Selector or a block that outputs a bus using a bus object. It can also be connected to bus capable blocks that meet the conditions for supporting buses provided the bus entering the block has been created by using a bus creator.

At the root level, I have connected an Inport block to the input port of the subsystem.

Answer 1

[MathWorks Support Team]

In order to create and build a subsystem, which has an Inport block feeding into a Bus Selector block, perform the following steps:

1. Double click on the Inport Block to view the Block Properties. Click on the Signal Specification tab and check ‘Specify properties via bus object’. Keep the default name as ‘BusObject’. You will have to do this for the Inport blocks at the root level and also within the subsystem.

2. Create the bus object, BusObject, by using the Bus Editor. To create the bus object and edit its properties execute the following code at the MATLAB command prompt:

BusObject = Simulink.Bus

buseditor

In the resulting window, the Bus Editor, add the signals that the input bus will have with the appropriate names. Verify that the change has been saved by typing ‘BusObject’ at the prompt.

3. You should now be able to right click on the system and build it by selecting Real-Time Workshop from the menu.