How to change the line width for fplot?

Hello All,

I want to make lines in graph thicker. Here is my code, but it seems not working.

clear all;
close all
clc;

w1=0;
w2=16.73;

x1= @(t) 0.05*cos(w1.*t)-0.05*cos(w2.*t);
x2= @(t) 0.05*cos(w1.*t)+0.05*cos(w2.*t);

graph1 = plot(figure1);
set(graph1,'LineWidth',2);

fplot(x1,[0,2],'k');
hold on;
fplot(x2,[0,2],'--k');
hold off;

legend('x','y');
title('plot');
xlabel('t');
ylabel('d');

I am increasing the linewidth, but messing up somewhere. In plot command, you can straightaway write 'LineWidth' in plot() itself, but no so in fplot. Any comments where I messed up?

[Abby Skofield]

Have you tried setting LineWidth directly in the call to fplot? Both plot and fplot support Name,Value pairs like LineWidth, as in:

 x1= @(t) 0.05*cos(w1.*t)-0.05*cos(w2.*t);
 fplot(x1,[0,2],'k','LineWidth',2);
 hold on
 plot(0:0.1:2,sin(0:0.1:2)/10,'k','LineWidth',2);

Answer 1

[lvn]

Starting in R2016a, you can specify the 'LineWidth' property the same way you do for plot. For example:

>> fplot(x1,[0,2],'k','LineWidth',2);

In R2015b and earlier releases, you have to search for the object and set the line width. To set the widths of all the lines to 2:

>> set(findall(gca, 'Type', 'Line'),'LineWidth',2);

Or, to set the width of one line:

>> set(findobj(gca, 'Type', 'Line', 'Linestyle', '--'), 'LineWidth', 2);

[帅 赵]

I can't make changes through set， But I can add parameters in setting with fplot

Answer 2

[the cyclist]

One way is to use fplot() to get the (x,y) values, then use plot() to do the plotting and then adjusting properties via the plot handles.

clear all;
close all
clc;
w1=0;
w2=16.73;
x1= @(t) 0.05*cos(w1.*t)-0.05*cos(w2.*t);
x2= @(t) 0.05*cos(w1.*t)+0.05*cos(w2.*t);
[xx1,yy1] = fplot(x1,[0,2],'k');
[xx2,yy2] = fplot(x2,[0,2],'--k');
hold on
h1 = plot(xx1,yy1,'k');
h2 = plot(xx2,yy2,'k');
hold off;
set([h1 h2],'LineWidth',2)
legend('x','y');
title('plot');
xlabel('t');
ylabel('d');

[Satyam Anumalla]

Thank you. Linewidth working well