Is it possible to use an NI USB-6002 using the Data Acquisition Toolbox only (error NI Error -200452)?

I am using R2014a and its Data Acquisition Toolbox. I am able to establish a session, communicate to setup DI/O, Analog Output and Timer, but can not create an Analog Input. The error I get from this is as follows:

Error using Read_Write_NI_daq (line 23)
NI Error -200452:
Specified property is not supported by the device or is not applicable to the task.
Property: DAQmx_AI_Coupling
Channel Name: Dev1/ai0

Task Name: _unnamedTask<95>

Status Code: -200452

My code:

% Read and Write to NI USB-6002
clc
clear

NI_daq = daq.getDevices;
NI_daq_session = daq.createSession('ni');   % create session with the daq

% add analog output channel
% [ch, idx] = addAnalogOutputChannel(NI_daq_session,'Dev1',0:1,'Voltage');
% outputSingleScan(NI_daq_session,[-2.5 3.5]);

% add digital channels
% [ch, idx] = addDigitalChannel(NI_daq_session,'Dev1','port0/line4:7','OutputOnly');
% outputSingleScan(NI_daq_session,[1 0 1 0]);

% add analog input channel

% addAnalogInputChannel(NI_daq_session,'Dev1','ai0','Voltage');
%     NI_daq_session.addAnalogInputChannel('Dev1','ai1','Voltage')

% ch=addAnalogInputChannel(NI_daq_session,'Dev1','ai0', 'Voltage');
[ch, idx] = addAnalogInputChannel(NI_daq_session,'Dev1','ai0','Voltage');
% startForeground
data = inputSingleScan(NI_daq_session);

Answer 1

[Friedrich]

Hi,

The USB 6002 is not officially supported by Data Acquisition Toolbox. For a list of supported devices see here. Maybe try to upgrade to a nidaqmx version greater than 9.8.x and try again. There were some driver changes on the NI side which might make it possible to use.

Answer 2

[Othmane]

I am having the same problem

Answer 3

[Othmane]

The AOs work just fine for this 6002 Device using the exact same syntax, but the AIs don't work and I get the same error message as above. I am also using the latest version of the nidaqmx

Answer 4

[muhammet balcilar]

here is the the solution

http://www.mathworks.com/matlabcentral/answers/153597-reading-data-from-ni-usb-6000