failure in using WLAN Toolbox to do System-Level Simulation as Matlab Documentation: no Helper Function or Object or Class

Hello, I'm doing System-Level Simulation Node Configuration presented on the Matlab Documentation: https://ww2.mathworks.cn/help/wlan/ug/wlan-node-composition-and-configuration.html

addpath(genpath(fullfile(pwd,'mlWLANSystemSimulation')));
hConfigurationHelp('wlanTrafficConfig')

but matlab tells me there's no function or variable named hConfigurationHelp. I installed the WLAN Toolbox and I can run End-to-End Simulation examples, but I failed in doing System-Level Simulation. Does anyone knows what's the problem?

Thanks very much!

Answer 1

[Pruthvi Charka]

Hi,

I understand that you tried to execute the following command from the WLAN Node Composition and Configuration page:

>> addpath(genpath(fullfile(pwd,'mlWLANSystemSimulation')));

Before you can execute the above command, please try to open a WLAN System-Level Simulation example. As an example, you can do that using the following command:

>> openExample('wlan/WLANResidentialScenarioExample')

I understand that you are trying to perform System-Level Simulation. The documentation you have pointed out is only a description page for the node composition and configuration for all the system-level simulation examples in WLAN Toolbox.

If you want to perform System-Level Simulations for WLAN, you can refer to the following examples:

• (Introduced in R2021a) https://in.mathworks.com/help/wlan/ug/802-11ax-multinode-system-level-simulation-of-residential-scenario-using-matlab.html
• (Introduced in R2021b) https://in.mathworks.com/help/wlan/ug/getting-started-with-wlan-system-level-simulation-in-matlab.html

Hope this helps!