I found this paper that was hlepful https://www.inmotive.com/s/Ingear-Simulation-Instructions-EW06.pdf
How to add gearbox in EV reference application Driveline?
6 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
BLOSSOM FERNANDEZ
el 24 de Ag. de 2022
Comentada: BLOSSOM FERNANDEZ
el 7 de Ag. de 2023
I do not have access to simscape. In my application, I have a motor connected to a fixed ratio reduction gearbox and that is connected to the transfer case (for my four wheel drive). I need to add a gear box in the drive-line model under the EV reference application example.
cd(setupExample('autoblks/EVReferenceApplicationExample'));helpersetupev
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1107150/image.png)
What additional blocks do I need to add with the gearbox block in order for it to work? more torsional blocks before and after the gearbox? inertia blocks?
The feeback vehcile velocity does not follow the reference velocity with all the different types of connections I have tired so far.
Respuesta aceptada
Jongil Lee
el 7 de Ag. de 2023
Dear all
I suggest to use 2-way connector instead of Simulink port. Please refer to see below snapshot.
You can change port type from menu.
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1452627/image.png)
Más respuestas (0)
Ver también
Categorías
Más información sobre Powertrain Blockset en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!