Code generation for PIC32 fails while using ADC due to Error: bitfield ADCEOSIF not found. bitFieldsSFR_Index = 14.

Hello,

I am using PIC32MK0512MCJ064. When i try to use ADC and generate code, an error stops the generation.

Error: bitfield ADCEOSIF not found. bitFieldsSFR_Index = 14.

Any help would appreciated.

Answer 1

[Sivapriya Srinivasan]

Hello,

As the error suggests that there might be an issue with the code generation process for the ADC module on the PIC32MK0512MCJ064

You can try resolving this by

1.Ensuring that you are using the correct version of the software development tools so that its compatible with the microcontroller

2. Verify that you have correctly configured the ADC module in your code. Check if the ADCEOSIF bitfield is defined and accessible in the device header files or any custom code you have written. If it is missing, it might indicate an issue with the device support package or the header files.

3.Update the device support package or the code generation tools you are using to the latest version. This can help ensure compatibility with the PIC32MK0512MCJ064 microcontroller and resolve any known issues or bugs.

4.If you have made any modifications to the device header files or code generation templates, revert them to their original state and try generating the code again. Custom modifications might introduce errors or inconsistencies that can cause the code generation process to fail.

5.Reach out to the manufacturer or the development community for the PIC32MK0512MCJ064 microcontroller for any specific updates, patches, or workarounds related to the ADC module and code generation.

If the issue persists after trying these steps, it might be necessary to provide more details about your code, the specific error message, and the development environment you are using to further investigate and provide a more specific solution.

[Ondrej Richter]

hello,

thank you for the answer. Solution was found in forum for mplab blockset. Solution.