Plot does not include the whole data set

Hello together,

I wanted to plot my arrays (106510x1) Time & Voltage but it only plots me values up to 103000 and cut off the remaining 3k values.

Can you help me with this issue please. I couldn't find an issue like this one yet in the forum.

Thanks in advance.

Answer 1

[Rahul]

Hi Oliver,

Please check a couple of things at your end:

1. Check the range of your x-axis values: Ensure that the x-axis values in your DM4.Time array cover the entire range of your data, including the missing 3,000 values. It's possible that the x-axis range is not set correctly, causing the plot to cut off.
2. Verify the size of your arrays: Double-check that both DM4.Time and DM4.Voltage arrays have the same length of 106,510 elements. If one of the arrays has fewer elements, it could cause the plot to display only a portion of the data.
3. Adjust the plot limits: Manually set the limits of the x-axis using the xlim function to ensure that the entire range of your data is displayed. For example, you can try xlim([min(DM4.Time), max(DM4.Time)]) to set the x-axis limits based on the minimum and maximum values in DM4.Time.
4. Check for any data manipulation or filtering: If you have performed any data manipulation or filtering on your arrays, make sure that it is not inadvertently causing the issue.

Hope this helps.

Thanks.

[Oliver Makan]

Hi Rahul,

thanks for your help.

I checked again and filtered relevant data of the Time array.

Thank you.