xcp on serial Custom board c2000

69 visualizaciones (últimos 30 días)
ali
ali el 20 de Ag. de 2023
Respondida: ali el 26 de Ag. de 2023
I connected my custom c2000 320f28335 mcu board via sci_a with com port to simulink for xcp debugging, but there is time out error on connection.
Is there any specific hardware configuration?
matlab version 2022b.
the error is :
Could not connect to target application: XCP internal error: timeout expired, in response to XCP CONNECT command
  1 comentario
ali
ali el 23 de Ag. de 2023
Sci-a connected to pc via USB to TTL device, on com port and I configured this port number in hardware configuration in simiulink and also I checked pin number of sci-a

Iniciar sesión para comentar.

Iniciar sesión para responder a esta pregunta.

Respuesta aceptada

ali
ali el 26 de Ag. de 2023
in my case the problem was due to Gnd connection of board and USB to TTL device, I had not connected Gnd,
after I connect it, external mode works correctly

Más respuestas (0)

Categorías

Más información sobre Deployment, Integration, and Supported Hardware en Help Center y File Exchange.

Etiquetas

Productos


Versión

R2022b

Community Treasure Hunt

Find the treasures in MATLAB Central and discover how the community can help you!

Start Hunting!

Translated by