![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1726056/image.png)
Can we change the Constraints in MPC ?
2 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Hello,
I'm using the Online feature of mpc block .i.e varying the MV constraints with simulation time.
Is it posible to change the inequality of the constraints in mpc block in matlab/simulink?
For example:
If ECR values (V) is 0 and scale factor is 1, then
default constraint is : u_min <= u <= u_max
and I would like to change to : u_min < u < u_max
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1726006/image.png)
0 comentarios
Respuestas (1)
Sam Chak
el 2 de Jul. de 2024
Hi @Kripanshu
If you wish to define the bounds on the manipulated variable, u, such that
, can you accept the following workaround?
![](https://www.mathworks.com/matlabcentral/answers/uploaded_files/1726056/image.png)
umin = -1; % lower bound
umax = 1; % upper bound
delta = 0.0001; % user-defined, ideally should be eps(1) for double precision
MV = struct(Min = umin+delta, Max = umax-delta)
4 comentarios
Sam Chak
el 3 de Jul. de 2024
Hi @Kripanshu
I'm not familiar with the specifics of your MPC implementation. When you mentioned performing iterations on the delta to get an optimum value according to the system model and adding other blocks like switches to make it work, this sounds more like an optimization problem rather than a generic MPC problem.
Ver también
Categorías
Más información sobre Controller Creation en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!