Issue Related to Interfacing simulink with arduino hardware
8 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
SHAHAB
el 23 de Sept. de 2025 a las 14:20
Comentada: SHAHAB
el 27 de Sept. de 2025 a las 15:32
- Hi. This is the error I am getting. I had installed the simulink for arduino add on for hardware support
- And also sort for the COM port issue as mentioned in your web site
- ### Starting build procedure for: Lab_1_2 "### Generating static library." "F:/waqas/bin/win64/gmake" -j5 -C "C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1" SHELL="%SystemRoot%/system32/cmd.exe" -f avrcore.mk all gmake[1]: Entering directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1' "### Successfully generated libcore.a library." gmake[1]: Leaving directory C:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/STATIC~1' "F:/waqas/bin/win64/gmake" -j5 SHELL="%SystemRoot%/system32/cmd.exe" -f "Lab_1_2.mk" all gmake[1]: Entering directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw' "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-g++" -std=gnu++11 -fpermissive -fno-exceptions -fno-threadsafe-statics -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"MW_arduino_digitalio.dep" -MT"MW_arduino_digitalio.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -
- IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "MW_arduino_digitalio.o" "C:/ProgramData/MATLAB/SupportPackages/R2023b/toolbox/target/supportpackages/arduinobase/src/MW_arduino_digitalio.cpp" "C:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/bin/avr-gcc" -std=gnu11 -c -w -ffunction-sections -fdata-sections -MMD -DARDUINO=10801 -MMD -MP -MF"xcp_ext_mode.dep" -MT"xcp_ext_mode.o" -Os -g -mmcu=atmega328p -DF_CPU=16000000L -DARDUINO_AVR_UNO -DARDUINO_ARCH_AVR -D_RUNONTARGETHARDWARE_BUILD_ -DXCP_ADDRESS_GRANULARITY=XCP_ADDRESS_GRANULARITY_BYTE -DCODERTARGET_XCP_DAQ_PACKED_MODE -DCODERTARGET_XCP_MAX_CONTIGUOUS_SAMPLES=2 -D__MW_TARGET_USE_HARDWARE_RESOURCES_H__ -DMW_TIMERID=1 -DMW_PRESCALAR=256 -DMW_TIMERCOUNT=59286 -DMW_SCHEDULERCOUNTER=1 -DARDUINO_NUM_SERIAL_PORTS=1 -D_RTT_BAUDRATE_SERIAL0_=9600 -D_RTT_CONFIG_SERIAL0_=SERIAL_8N1 -D_RTT_ANALOG_REF_=0 -DMW_RTIO_SERIAL0 -DCLASSIC_INTERFACE=0 -DALLOCATIONFCN=0 -DEXT_MODE=1 -DONESTEPFCN=1 -DTERMFCN=1 -DMULTI_INSTANCE_CODE=0 -DINTEGER_CODE=0 -DMT=0 -DXCP_EXTMODE_SIMULATION_TIME_IN_TICKS -DXCP_DAQ_SUPPORT -DXCP_CALIBRATION_SUPPORT -DXCP_TIMESTAMP_SUPPORT -DXCP_TIMESTAMP_BASED_ON_SIMULATION_TIME -DXCP_SET_MTA_SUPPORT -DEXTMODE_XCP_TRIGGavr-g++: error: Box/Lab: No such file or directory ER_SUPPORT -DXCP_MEM_BLOCK_1_SIZE=32 -DXCP_MEM_BLOCK_1_NUMBER=1 -DXCP_MEM_BLOCK_2_SIZE=56 -DXCP_MEM_BLOCK_2_NUMBER=1 -DXCP_MEM_BLOCK_3_SIZE=8 -DXCP_MEM_BLOCK_3_NUMBER=1 -DXCP_MEM_RESERVED_POOLS_TOTAL_SIZE=212 -DXCP_MEM_RESERVED_POOLS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOL_BLOCKS_NUMBER=2 -DXCP_MEM_DAQ_RESERVED_POOLS_NUMBER=1 -DXCP_MIN_EVENT_NO_RESERVED_POOL=1 -DXCP_MAX_CTO_SIZE=32 -DXCP_MAX_DTO_SIZE=65532 -DXCP_MAX_ODT_ENTRY_SIZE=255 -DEXTMODE_STATIC -DEXTMODE_STATIC_SIZE=250 -DON_TARGET_WAIT_FOR_START=1 -DTID01EQ=0 -DXCP_CUSTOM_PLATFORM -DEXIT_FAILURE=1 -DEXTMODE_DISABLEPRINTF -DEXTMODE_DISABLETESTING -DEXTMODE_DISABLE_ARGS_PROCESSING=1 -DSTACK_SIZE=64 -DRT -DMODEL=Lab_1_2 -DNUMST=1 -DNCSTATES=0 -DHAVESTDIO -DMODEL_HAS_DYNAMICALLY_LOADED_SFCNS=0 -IF:/ACE Box/Lab 1.2 -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~2/include -IF:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw -IF:/waqas/extern/include -IF:/waqas/simulink/include -IF:/waqas/rtw/c/src -IF:/waqas/rtw/c/src/ext_mode/common -IF:/waqas/rtw/c/ert -IF:/waqas/toolbox/coder/xcp/src/target/server/include -IF:/waqas/toolbox/coder/xcp/src/target/server/common -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/src -IF:/waqas/toolbox/coder/xcp/src/target/server/protocol/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/include -IF:/waqas/toolbox/coder/xcp/src/target/server/transport/src -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/include -IF:/waqas/toolbox/coder/xcp/src/target/server/platform/default -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/include -IF:/waqas/toolbox/coder/xcp/src/target/ext_mode/src -IF:/waqas/toolbox/coder/rtiostream/src -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/cores/arduino -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/arduino/avr/variants/standard -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/libraries/Servo/src -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/include -IC:/PROGRA~3/MATLAB/SUPPOR~1/R2023b/toolbox/target/SUPPOR~1/ARDUIN~1/SCHEDU~1/include -IC:/ProgramData/MATLAB/SupportPackages/R2023b/aIDE/hardware/tools/avr/avr/include/avr -o "xcp_ext_mode.o" "F:/waqas/toolbox/coder/xcp/src/target/ext_mode/src/xcp_ext_mode.c" avr-g++: error: 1.2: No such file or directory avr-g++: error: Box/Lab: No such file or directory avr-g++: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** No rule to make target F:/ACE', needed by Lab_1_2.o'. Stop. gmake[1]: *** Waiting for unfinished jobs.... gmake[1]: *** [MW_arduino_digitalio.o] Error 1 avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2: No such file or directory avr-gcc: error: Box/Lab: No such file or directory avr-gcc: error: 1.2/Lab_1_2_ert_rtw: No such file or directory gmake[1]: *** [xcp_ext_mode.o] Error 1 gmake[1]: Leaving directory F:/ACE Box/Lab 1.2/Lab_1_2_ert_rtw' gmake: *** [all] Error 2 The make command returned an error of 2 ### Build procedure for Lab_1_2 aborted due to an error. Build Summary Top model targets built: Model Action Rebuild Reason =================================================================== Lab_1_2 Failed Code generation information file does not exist. 0 of 1 models built (0 models already up to date) Build duration: 0h 2m 8.7477s
0 comentarios
Respuesta aceptada
Mohith Prabhu
el 25 de Sept. de 2025 a las 9:13
Hello Shahab
The issue you are seeing is due to space in the current working directiry path " F:/ACE Box/Lab 1.2". Navigate to an alternate path without spaces in the folder name and retry the model build.
Hope this help
Regards,
Mohith
Más respuestas (0)
Ver también
Categorías
Más información sobre Signal Integrity Kits for Industry Standards en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!