Sonar range and speed/doppler output using phased.Ran​geDopplerR​esponse with match filtering

%I setup the rangedopresp using the setup for s ingle acoustic projector
%and hydrophone.

% I succesffully created the IQ cube and can plot the slow and fast times.  

fs = 60e3;
propSpeed = 1500;
fc = 30000;
prf = 0.25;
ndop = 2048;

rangedopresp = phased.RangeDopplerResponse( ...
    'SampleRate', fs, ...
    'PropagationSpeed',propSpeed, ...
    'DopplerFFTLengthSource','Property', ...
    'DopplerFFTLength',ndop, ...
    'DopplerOutput','Speed', ...
    'MaximumNumInputSamplesSource', 'Property', ...
    'MaximumNumInputSamples', 240000, ...
    'OperatingFrequency', fc, ...
    'PRFSource', 'Property',...
    'PRF', prf);


% Converting in the final step for range and speed using
[rngdopresp,rnggrid,dopgrid] = rangedopresp(cube,coeff); 

Unrecognized function or variable 'cube'.

% the resulting Range - Doppler map show the correct range but the 
% speed range is very small -3e-3 to 3e-3 m/s
% If I set the speed to zero the result is as expected.
% for anyother speed greater than +- 3e-3 it is outside the range.
% I have not been able to identify how to get the correct speed range
%  
% help will be appreciated

[Torsten]

"ndop" is a missing variable.

[Joe Cuschieri]

missed that but it is defined

ndop = 2048

Answer 1

[Anmol]

Hi Joe,

I understand that you are trying to use "phased.RangeDopplerResponse" in MATLAB's Phased Array System Toolbox to process acoustic data from a single projector and hydrophone setup, aiming to generate a Range-Doppler map that accurately measures both the distance (range) and speed (Doppler) of a target but you are getting an error and also the speed range is small.

1. You can check the variable “cube” is defined and loaded into the active workspace. You can refer: https://www.mathworks.com/company/technical-articles/building-and-processing-a-radar-data-cube.html
2. As a workaround, you can try increasing the PRF value as there is a trade-off between maximum range and maximum speed observed.You can refer to this documentation for more details : https://www.mathworks.com/help/releases/R2025a/radar/ug/designing-radar-waveforms-for-high-PRF-systems.html

I hope, it helps.