Open and Close Baxter's gripper
3 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
Haoying Kang
el 16 de Mzo. de 2017
Comentada: snow John
el 26 de Nov. de 2018
Hi, we are trying to make our baxter robot open and close its gripper, we are using the following code that we generate from mathwork tutorial, but is not working, so can you please help?
rosinit('169.254.9.127') % ip address of baxter
rostopic info /robot/end_effector/right_gripper/command
pub = rospublisher('/robot/end_effector/right_gripper/command')
msg = rosmessage('baxter_core_msgs/EndEffectorCommand')
showdetails(msg)
msg.Id=65538
msg.Command= 'grip'
msg.Sender= 'foo'
msg.Sequence= 1
send(pub,msg)% nothing happens
msg.Command= 'release'
send(pub,msg) %nothing happens again
rosshutdown
0 comentarios
Respuesta aceptada
Benjamin Brandwin
el 25 de Abr. de 2017
Editada: Benjamin Brandwin
el 25 de Abr. de 2017
I had the same problem. After some searching I managed to figure it out. The way to do this is through the script gripper_action_server.py
Use rosrun baxter_interface gripper_action_server.py
This will start an node for baxter gripper control
then in Matlab use rosaction list. You should now see 2 actions, one for the left gripper and one for the right.
then in Matlab :
[actClient,goalMsg] = rosactionclient('/robot/end_effector/right_gripper/gripper_action');
waitForServer(actClient
goalMsg = 100 % fully open
sendGoalAndWait(actClient,goalMsg,10)
goalMsg = 0 % fully closed
sendGoalAndWait(actClient,goalMsg,10)
2 comentarios
Benjamin Brandwin
el 25 de Abr. de 2017
This also allows you to specify the max effort, which is awesome!
snow John
el 26 de Nov. de 2018
I try this:
[actClient1,goalMsg1] = rosactionclient('/robot/end_effector/right_gripper/gripper_action');
waitForServer(actClient1)
Rightgripper=rosmessage( 'control_msgs/GripperCommandGoal');
Rightgripper.Command.MaxEffort=0;
Rightgripper.Command.Position=90;
goalMsg1=Rightgripper ;% fully open
sendGoalAndWait(actClient1,goalMsg1);
and these codes can control the gripper,but i want to know how to control the gripper's velocity?
thanks for any help!
Más respuestas (0)
Ver también
Categorías
Más información sobre Network Connection and Exploration en Help Center y File Exchange.
Productos
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!