change arduino code into matlab code

i want to use servo motor and ultrasonic sensor in matlab. please let me know how to change arduino code into matlab code.

#include <Servo.h>
Servo myservo;
long duration;
long distance1 = 100;
long distance2 = 100;
void setup()
{
  Serial.begin(9600);
  pinMode(3, OUTPUT);
  pinMode(2, INPUT);
  pinMode(13, OUTPUT);
    myservo.attach(4);
    myservo.write(150);
  }
void loop()
{
  digitalWrite(3, HIGH);
  delayMicroseconds(10);
  digitalWrite(3, LOW);
    duration = pulseIn(2, HIGH);
    distance1 = duration / 29 / 2;
    // Serial.print(distance1);
    // Serial.println(" cm");
    if (distance1 < 30)
    {
      digitalWrite(13, HIGH);
      if (abs(distance1 - distance2) < 30) myservo.write(150);
    }
    else
    {
      digitalWrite(13, LOW);
      if (abs(distance1 - distance2) < 30) myservo.write(30);
    }
    distance2 = distance1;
    delay(100);
  }

[Walter Roberson]

How would you interface the sensors and servo to MATLAB? Would you connect them to an analog/digital convertor module such as National Instruments?

Or is the idea that you would continue to use arduino, but you would have MATLAB tell arduino what to do?

Answer 1

[Sid Jhaveri]

You might want to use Arduino Support Package for MATLAB. For more information I would suggest referring the following links:

1) https://www.mathworks.com/hardware-support/arduino-matlab.html

2) https://www.mathworks.com/help/supportpkg/arduinoio/ref/arduino.html