Plot only returning one point, MATLAB 2016

My partner and I are coding for a project and are struggling to create a plot without one point. We are having a hard time finding the issue in our code where we are only asking matlab to do so. Any suggestions to the code and counters in it would be appreciated.

%% Define Constants

Ly = 0.8; %[m] Lz = 0.6; %[m] f = 340; %[Hz] Uh = 20; %[m/s]

DeltaY = 0.1; %[m] DeltaZ = 0.1; %[m] Qs=Uh*DeltaY*DeltaZ; %[m3/s]

m=Ly/DeltaY; n=Lz/DeltaZ;

PoC = 415; %[rayl] c = 340; %[m/s]

w = 2*pi*340; %[rad/s] klength = 2*pi; s = pi/2;

theta = 0;

%% Set Output locations with (x,y,z) notation

Xa = 0.1*Ly; Ya = 0; Za = 0;

Xb = Ly; Yb = 0; Zb = 0;

Xc = 10*Ly; Yc = 0; Zc = 0;

Xd = 0.1*Ly; Yd = DeltaY; Zd = 0;

Xe = 1*Ly; Ye = DeltaY; Ze = 0;

Xf = 10*Ly; Yf = DeltaY; Zf = 0;

%% Point Source Arrays

Column = DeltaY * [-3.5 -2.5 -1.5 -0.5 0.5 1.5 2.5 3.5]; Row = DeltaZ * [ 2.5; 1.5; 0.5; -0.5; -1.5; -2.5 ];

X0 = 0; MagA=((PoC*klength)/(2*pi))*Qs;

%% Pressure Matrix -- Evaluated at Point A APressure=0; t = 0:0.0001:0.04999; length(t); AValue=zeros(1,length(t)); for t = 0:0.0001:0.05; for z=-0.25:0.1:0.25 for y=-0.35:0.1:0.35 xdisp=(Xa-X0); ydisp=(Ya-y); zdisp=(Za-z); radA=sqrt((xdisp)^2+(ydisp)^2+(zdisp)^2); APressureInc=MagA/radA*cos((w*t)-(klength*radA)+theta+s); APressure=APressure+APressureInc; end end AValue=APressure; end

figure() subplot(3,2,1) plot(t,ATimePressure)