How to implement improper transfer function (s + 0.1) in simulink?
9 visualizaciones (últimos 30 días)
Mostrar comentarios más antiguos
i have used the matlab guide of solving improper fractions in simulink which is as follows.
num=[1 0.1];
den=1;
[r,p,k]=residue(num,den);
sys1 = tf(r(1),[1,-p(1)])
sysk1 = k(1)*s;
sysk2 = k(2);
But it shows this error.
Solving_ImproperFun_simulink
Index exceeds the number of array elements (0).
Error in Solving_ImproperFun_simulink (line 4)
sys1 = tf(r(1),[1,-p(1)])
0 comentarios
Respuestas (2)
Walter Roberson
el 4 de Abr. de 2019
Try it at the MATLAB level. You will see that r and p both come out empty, so indexing them at location 1 will not work.
Why not go directly to
sys1 = tf(num, den);
3 comentarios
Walter Roberson
el 4 de Abr. de 2019
You cannot import a transfer function. You would not be able to import a transfer function even if your original code had worked.
You cannot use the Transfer Function block in Simulink for this because that block requires that the denominator be at least as high a degree as the numerator.
You can use a State Space block: https://www.mathworks.com/help/simulink/slref/statespace.html . And you can use MATLAB ahead of time to work out what the matrices should be.
You can also use tf() inside a MATLAB Function Block. It is possible that you might need to coder.external() it, and you might not be able to use it with any Rapid Acceleration turned on.
Elio Sánchez G.
el 30 de Jun. de 2019
You have to sum 2 signals: dr/dt + r (where "r" is the input signal). Just use three blocks: derivative, sum and gain.
1 comentario
Sina Dehbari
el 7 de Mayo de 2020
Dear Elio,
Could you send a picture of blokcs? I don't know how connect them
Ver también
Categorías
Más información sobre Simulink Functions en Help Center y File Exchange.
Community Treasure Hunt
Find the treasures in MATLAB Central and discover how the community can help you!
Start Hunting!